WEIDMULLER 103140WDU15ZZ Feed-through Terminal Block

WEIDMULLER 103140WDU15ZZ Feed-through Terminal Block Specifications:

• Type: Feed-through terminal
• Order No.: 1031400000
• Version: Screw connection, 1.5 mm²
• Rated Voltage: 800 V
• Rated Current: 17.5 A
• GTIN (EAN): 4008190148546
• Quantity: 100 pc(s).
• Width: 5.1 mm
• Height: 60 mm
• Depth: 46.5 mm
• Weight: 8.6 g
• Width (inches): 0.201 inch
• Height (inches): 2.362 inch
• Depth (inches): 1.831 inch
• Net weight: 8.09 g
• Continuous operating temp. min: -60 °C
• Continuous operating temp. max: 130 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: Dark Beige
• Certificate No. (ATEX): DEMKO14ATEX1338U
• Max. voltage (ATEX): 550 V
• Wire cross section max. (ATEX): 2.5 mm²
• Current (IECEX): 17.5 A
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Certificate No. (IECEX): IECEXULD14.0005U
• Current (ATEX): 17.5 A
• Max. voltage (IECEX): 550 V
• Wire cross section max. (IECEX): 2.5 mm²
• Marking EN 60079-7: Ex e II
• Version (System specifications): Screw connection, Twin connection, for plug-in cross-connector, One end without connector, End coverplate required, Number of levels: 1, Number of potentials per tier: 1, PE connection: No, N-function: No, PEN function: No
• Tightening torque (clamping screw for copper conductors): 0.4...0.6 Nm
• Number of potentials: 1
• No. of clamping points per level: 4
• Levels cross-connected internally: No
• Mounting rail: TS 35
• PE function: No
• Cross-section for connected wire, solid, two clampable wires, min: 0.5 mm²
• Wire connection cross section, finely stranded, two clampable wires, min: 0.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min: 0.5 mm²
• Cross-section for connected wire, solid, two clampable wires, max: 2.5 mm²
• Wire cross-section, finely stranded, two clampable wires, max: 1 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max: 0.75 mm²
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No. (CSA): 200039-1057876
• Voltage size C (CSA): 300 V
• Wire cross section min. (CSA): 26 AWG
• Current size C (CSA): 10 A
• Wire cross section max. (CSA): 12 AWG
• Rated cross-section: 1.5 mm²
• Rated impulse withstand voltage: 8 kV
• Certificate No. (UR): E60693
• Conductor size Factorywiringmin. (UR): 26 AWG
• Conductor size Field wiringmin. (UR): 22 AWG
• Voltage size C (UR): 300 V
• Conductor size Factorywiringmax. (UR): 12 AWG
• Conductor size Field wiringmax. (UR): 12 AWG
• Current size C (UR): 25 A
• Rated voltage: 800 V
• Volume resistance according to IEC 60947-7-x: 1.83 mΩ
• Pollution severity: 3