WEIDMULLER 40122 SAK 4 S 6.3/2.8/KRG Terminal Block

WEIDMULLER 40122 SAK 4 S 6.3/2.8/KRG Terminal Block Specifications:

• Available until: 2011-04-01
• Type: SAK 4 S 6.3/2.8/KRG
• Version: Screw connection, with cable-lug connection, for screwable cross-connection, One end without connector
• GTIN(EAN): 4008190035655
• Quantity: 100pc(s)
• Alternative product: 0401260000
• Width: 6.5 mm
• Height of lowest version: 51.5 mm
• Weight: 12.49 g
• Height: 40 mm
• Depth: 51.5 mm
• Net weight: 12.17 g
• Continuous operating temp., min.: -60 °C
• Continuous operating temp., max.: 130 °C
• Explosion-tested version: No
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Busbar
• Open sides: right
• Certificate No.(CSA): 12400-129
• Current size C(CSA): 13 A
• Wire cross section min. (CSA): 26 AWG
• Voltage size C(CSA): 300 V
• Wire cross section max.(CSA): 12 AWG
• Number of connections, additional connection: 2
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 4 mm²
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection,min.: 0.5 mm²
• Clampingscrew: M 3
• Tighteningtorque,min.: 0.5 Nm
• Torque level with DMS electric screwdriver: 2
• Wire connection cross section, solid core,min. rated connection: 0.33 mm²
• Wire connection cross section, stranded,rated connection,min.: 1.5 mm²
• Wire connection cross section, finely stranded,max.: 4 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,min.: 0.5 mm²
• Cross-section for connected conductor,finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,min.: 0.5 mm²
• Twin wire-end ferrules,min.: 0.5 mm²
• Wire connection cross section AWG,min.: AWG 26
• Strippinglength: 12 mm
• Connection direction: on side
• Clampingrange,rated connection,min.: 0.13 mm²
• Tighteningtorque,max.: 1 Nm
• Gauge to IEC 60947-1: A4
• Wire connection cross section, solid core max. rated connection: 6 mm²
• Wire connection cross section, stranded,rated connection,max.: 4 mm²
• Wire connection cross-section, finely stranded,min.: 0.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,max.: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,max.: 2.5 mm²
• Twin wire-end ferrules,max.: 2.5 mm²
• Wire connection cross section AWG,max.: AWG 12
• Cable-lug connections: fitted with insulating sleeves
• Rated cross-section spade connector 2.8 mm: 1 mm²
• Rated cross-section spade connector 6.3 mm: 2.5 mm²
• Rated cross-section: 4 mm²
• Rated impulse withstand voltage: 6 kV
• Current at maximum wires: 20 A
• Pollution severity: 3
• Rated voltage: 500 V
• Rated current: 20 A
• Standards: IEC 60947-7-1,IEC 61210
• Certificate No.(UR): E60693
• Conductor size Factory wiring min. (UR): 22 AWG
• Voltage size C(UR): 300 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiring max. (UR): 12 AWG
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: Medium Yellow
• Product family: SAK Series
• Levels cross-connected internally: No
• End cover plate required: Yes
• Number of levels: 1
• No. of clamping pointsper level: 3
• Mountingrail: TS 32
• PE connection: No