WEIDMULLER 8647680000 Multifunction Timing Relay

WEIDMULLER 8647680000 Multifunction Timing Relay Specifications:

• Type: TIMER BTMF-S
• Order No.: 8647680000
• Version: BT-SERIES, Multifunction timing relay, Number of contacts: 1, CO contact, AgNi 90/10, Rated control voltage: 24...230 V AC, 24...48 V DC, Continuous current: 5 A, Screw connection
• GTIN(EAN): 4032248308880
• Quantity: 10 pc(s).
• Width: 17.5 mm
• Height: 80 mm
• Depth: 74 mm
• Net weight: 74.8 g
• Width(inches): 0.689 inch
• Height(inches): 3.15 inch
• Depth(inches): 2.913 inch
• Humidity: 35...85 % rel. humidity, no condensation
• Operating temperature,min: -10 °C
• Storage temperature,min: -25 °C
• Storage temperature: -25 °C...65 °C
• Operating temperature, max: 55 °C
• Storage temperature,max: 65 °C
• Operatingtemperature: -10 °C...55 °C
• REACH SVHC: Lead 7439-92-1
• Certificate No. (UR): E223474
• Rated control voltage: 24...48 V DC + 10 % / - 15 % / 24...230 V AC + 10 %/- 15 %
• Pull-in/drop-out voltage, typ.: 20.4 V / 2.4 V AC, 20.4 V/2.4 V DC
• Repeat accuracy: ± 1 %
• Min. pulse duration: 50 ms
• Power rating: ≤ 0.4 VA, 1.6 W
• Status indicator: LED green: supply voltage, LED orange: relay output on
• Setting tolerance: 10 %
• Time ranges: 0.1 s - 1.2 s, 1 s - 12 s, 0.1 min - 1.2 min, 1 min - 12 min, 0.1 h - 1.2 h, 1 h - 12 h, 10 h - 120 h
• Max. reset time after voltage interruption: 100 ms
• Rated switching voltage: 250 V AC
• Continuous current: 5 A
• DC switching capacity (resistive), max.: 120 W @ 24 V
• Max. switching voltage, AC: 250 V
• AC switching capacity (resistive), max.: 2500 VA
• Contact type: 1 CO contact (AgNi 90/10)
• Contact resistance: 100 MΩ min., at 500 V DC
• Electrical service life, DC coil: 105 switching cycles (5A at 250 Vac, ohm load at 1800/h)
• Mechanical service life: 107 switching cycles (no load, 1800/h)
• Rail: TS 35
• Mechanical switch position indicator: No
• UL 94 flammability rating: V-2
• Colour: beige
• Wire connection method: Screw connection
• Tightening torque, max.: 0.98 Nm
• Clamping range, min.: 0.5 mm²
• Wire connection cross section AWG, min.: AWG 20
• Wire cross-section, solid, min.: 0.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 0.5 mm²
• Wire connection cross section, finely stranded, two clampable wires, min.: 0.5 mm²
• Stripping length, rated connection: 7 mm
• Clamping range, rated connection: 1.5 mm²
• Clamping range, max.: 2.5 mm²
• Wire connection cross section AWG, max.: AWG 14
• Wire cross-section, solid, max.: 2.5 mm²
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 2.5 mm²
• Wire cross-section, finely stranded, two clampable wires, max.: 1.5 mm²
• ETIM 6.0: EC001439
• eClass 9.0: 27-37-16-05
• eClass 10.0: 27-37-16-05
• ETIM 7.0: EC001439
• eClass 9.1: 27-37-16-05
• UNSPSC: 30-21-19-17
• Standards: UL508
• Certificate No. (CSA): 219713
• Protection degree: IP20
• Dielectric strength, Input/Output: 2 kVeff/ 1 min