WEIDMULLER 8881580000 Riderseries Relay Module

WEIDMULLER 8881580000 Riderseries Relay Module Specifications:

• Type: RCIKIT 24VDC 1CO LD/PB
• Order No.: 8881580000
• Version: RIDERSERIES RCI, Relay module, Number of contacts: 1, CO contact with test button
• Rated control voltage: 24 V DC
• Continuous current: 16 A
• GTIN(EAN): 4032248631834
• Quantity: 10pc(s)
• Relevant base: 8869490000
• Relevant relay: 8870250000
• Width: 15.8 mm
• Height: 77 mm
• Depth: 70.2 mm
• Net weight: 56.2 g
• Width(inches): 0.622 inch
• Height(inches): 3.031 inch
• Depth(inches): 2.764 inch
• Humidity: 40 °C / 93 % rel. humidity, no condensation
• Operating temperature,min: -40 °C
• Storage temperature,min: -40 °C
• Storage temperature: -40 °C...70 °C
• Operating temperature, max: 70 °C
• Storage temperature,max: 70 °C
• REACH SVHC: Lead 7439-92-1
• Power rating: 420 mW
• Coil resistance: 1440 Ω ± 10 %
• Protective circuit: Free-wheeling diode
• Rated current DC: 16.7 mA
• Pull-in/drop-out voltage,typ: 16.8 V/2.4 V DC
• Status indicator: Green LED
• Rated switchingvoltage: 250 V AC
• Max. switchingvoltage,AC: 400 V
• AC switchingcapacity (resistive),max: 4000 VA
• Switch-on delay: ≤ 8 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
• Inrush current: 30 A/4 s
• DC switchingcapacity (resistive),max: 384 W @ 24 V
• Switch-off delay: ≤ 6 ms
• Max. switching frequency at rated load: 0.1 Hz
• Mechanical service life: AC coil 5 x 10^6 switching cycles, DC coil 10 x 10^6 switching cycles
• Rail: TS 35
• Test button: yes (loackable, just when removing the detent lock)
• Colour: black
• Rated voltage: 250 V
• Pollution severity: 2
• Protection degree: IP20
• Creepage and clearance distance input – output: ≥ 8 mm
• Impulse withstand voltage: 5 kV (1.2/50 µs)
• Surge voltage category: III
• Insulatingmaterialgroup: IIIa
• Dielectric strength, Input/Output: 5 kVeff/ 1min
• Dielectric strength of open contact: 1 kVeff/ 1 min
• Standards: DIN EN 50178
• Certificate no.(CSA)base: 249409-2295474
• Certificate no. (cURus) relay: E224238
• Certificate no.(CSA)relay: 249409-2426937
• Certificate No.(DNVGL): TAA000011A
• Certificate no. (cURus) base: E223759
• Wire connection method: Screw connection
• Tighteningtorque,min: 0.5 Nm
• Clampingrange,rated connection: 2.5 mm²
• Clampingrange,max: 2.5 mm²
• Wire cross-section, solid, max: 2.5 mm²
• Wire connection cross section, finely stranded, max: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),max: 2.5 mm²
• Wire connection cross section, finely stranded,two clampable wires, max: 1.5 mm²
• Strippinglength,rated connection: 8 mm
• Tighteningtorque,max: 0.7 Nm
• Clampingrange,min: 1 mm²
• Wire cross-section,solid,min: 1 mm²
• Wire connection cross-section, finely stranded,min: 1 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min: 1 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min: 1 mm²
• Wire connection cross section, finely stranded,two clampable wires,min: 1 mm²
• Blade size: size PZ1
• ETIM 6.0: EC001437
• eClass 9.0: 27-37-16-01
• eClass 10.0: 27-37-16-01
• ETIM 7.0: EC001437
• eClass 9.1: 27-37-16-01
• UNSPSC: 30-21-19-17
• Product information: For full continuous current (16 A), relay connections 11–21, 12–22 and 14–24 must be bridged. IP20 without connected conductor at complete opened clamping yoke connection.