WEIDMULLER 8921140000 Relay Module with Contacts

WEIDMULLER 8921140000 Relay Module with Contacts Specifications:

• Type: RCMKITP-I 115VAC 4CO LD
• Order No.: 8921140000
• Version: RIDERSERIES RCM, Relay module, Number of contacts: 4 CO contact with test button
• Rated control voltage: 115 V AC
• Continuous current: 6 A
• GTIN(EAN): 4032248692354
• Quantity: 10 pc(s).
• Width: 28 mm
• Height: 98 mm
• Depth: 78.3 mm
• Net weight: 107.5 g
• Width(inches): 1.102 inch
• Height(inches): 3.858 inch
• Depth(inches): 3.083 inch
• Humidity: 40 °C / 93 % rel. humidity, no condensation
• Operating temperature,min.: -40 °C
• Storage temperature,min.: -40 °C
• Storage temperature: -40 °C...70 °C
• Operating temperature, max.: 70 °C
• Storage temperature,max.: 70 °C
• Operatingtemperature: -40 °C...70 °C
• REACH SVHC: Lead 7439-92-1
• Power rating: 1.0 VA
• Coil resistance: 4845 Ω ± 12 %
• Rated current AC: 8.8 mA
• Pull-in/drop-out voltage,typ.: 92 V/34.5 V AC
• Status indicator: red LED
• Rated switchingvoltage: 240 V AC
• AC switchingcapacity (resistive),max.: 1500 VA
• Switch-on delay: ≤ 15 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
• Max. switchingvoltage,AC: 240 V
• Inrush current: 12 A/20 ms
• DC switchingcapacity (resistive),max.: 144 W @ 24 V
• Switch-off delay: ≤ 10 ms
• Max. switching frequency at rated load: 0.1 Hz
• Contact type: 4 CO contact with test button (AgNi 90/10)
• Mechanical service life: AC coil 20 x 106 switching cycles, DC coil 30 x 106 switching cycles
• Rail: TS 35
• Mechanical switch position indicator: Yes
• Colour: black
• Rated voltage: 250 V
• Pollution severity: 2
• Protection degree: IP20
• Creepage and clearance distance input – output: ≥ 4 mm
• Dielectric strength of open contact: 1.2 kVeff/1 min.
• Surge voltage category: III
• Insulatingmaterialgroup: IIIa
• Dielectric strength, Input/Output: 2.5 kVeff/ 1 Min.
• Dielectric strength of neighbouring contacts: 2 kVeff/ 1 min
• Impulse withstand voltage: 5 kV (1.2/50 µs)
• Wire connection method: PUSH IN
• Clampingrange,rated connection: 1.5 mm²
• Clampingrange,max.: 1.5 mm²
• Wire cross-section, solid, max.: 1.5 mm²
• Wire connection cross section, finely stranded,max.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.75 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),min.: 0.75 mm²
• Blade size: 0.6 x 3.5 mm
• Strippinglength,rated connection: 12 mm
• Clampingrange,min.: 0.75 mm²
• Wire cross-section,solid,min.: 0.75 mm²
• Wire connection cross-section, finely stranded,min.: 0.75 mm²
• Wire cross-section, finely stranded, max. (AWG): AWG 16
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 0.75 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),max.: 1 mm²
• Standards: DIN EN 50178
• Certificate no.(CSA)base: 249409-2295474
• Certificate no. (cURus) relay: E224238
• Certificate no.(CSA)relay: 249409-2426937
• Certificate No.(DNVGL): TAA000011A
• Certificate no. (cURus) base: E223759
• ETIM 6.0: EC001437
• eClass 9.0: 27-37-16-01
• eClass 10.0: 27-37-16-01
• ETIM 7.0: EC001437
• eClass 9.1: 27-37-16-01
• UNSPSC: 30-21-19-17