AEMC 6417 Datasheet & Stock

The 6417 is a Clamp-on Ground Resistance Tester measures ground rod and grid resistance and impedance without the use of auxiliary rods. It can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test it. It simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. It includes a high sensitivity measurement function enabling measurement of leakage current flowing to ground or circulating in ground loops from 0.2mA to 40A and resistances from 0.01 to 1500Ω. It also offers battery life information at power-up and auto power-OFF power management. The buzzer and auto power-OFF features may be disabled at any time. There are alarm and data storage functions.




Test frequency selection provides more accurate results in inductive environments

Touch voltage is displayed to alert user to potential unsafe conditions

Loop resistance indication

Large multi-function, bright yellow organic display (OLED) is visible in all lighting conditions

Selectable test frequency improves accuracy in inductive environments

Differentiates between loop and ground resistance measurements

Data storage (Ω, A, V and µH with time-stamping) - Stores up to 2000 measurements

Easy clamp opening via a force compensation trigger system with 35mm clamp diameter

Displays stored measurements on the OLED display or by Bluetooth® to a PC or the Android™ based

Alarm function with adjustable set point and buzzer for quick field checks for volts, amps and ohms





DataView® software for data storage, real-time display, analysis and report & system configuration





Applications


Test & Measurement,

Industrial