Phoenix Contact 0309086 Test Disconnect Terminal Block

Phoenix Contact 0309086 Test Disconnect Terminal Block Specifications:

• Number of levels: 1
• Number of connections: 2
• Nominal cross section: 6 mm²
• Color: gray
• Insulating material: PA
• Flammability rating according to UL 94: V0
• Rated surge voltage: 6 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 1.31 W
• Connection in acc. with standard: IEC 60947-7-1
• Nominal current IN: 41 A
• Maximum load current: 57 A (with 10 mm² conductor cross section)
• Nominal voltage UN: 500 V
• Open side panel: Yes
• Shock protection test specification: IEC 60529:2001-02
• Back of the hand protection: guaranteed
• Result of surge voltage test: Test passed
• Surge voltage test setpoint: 7.3 kV
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 1.89 kV
• Result of the test for mechanical stability of terminal points: Test passed
• Result of bending test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Bending test conductor cross section: 0.5 mm² / 0.3 kg, 6 mm² / 1.4 kg, 10 mm² / 2 kg
• Tensile test result: Test passed
• Conductor cross section tensile test (0.5 mm²): 20 N
• Conductor cross section tensile test (6 mm²): 80 N
• Conductor cross section tensile test (10 mm²): 90 N
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 32/NS 35
• Setpoint: 5 N
• Result of voltage-drop test: Test passed
• Requirements, voltage drop: ≤ 6,4 mV
• Temperature-rise test: Test passed
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing (6 mm²): 0.72 kA
• Conductor cross section short circuit testing (10 mm²): 1.2 kA
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s
• Relative insulation material temperature index (Elec., UL 746 B): 130 °C
• Temperature index of insulation material (DIN EN 60216-1): 125 °C
• Static insulating material application in cold: -60 °C
• Behavior in fire for rail vehicles (DIN 5510-2): Test passed
• Flame test method (DIN EN 60695-11-10): V0
• Oxygen index (DIN EN ISO 4589-2): >32 %
• NF F16-101, NF F10-102 Class I: 2
• NF F16-101, NF F10-102 Class F: 2
• Surface flammability NFPA 130 (ASTM E 162): passed
• Specific optical density of smoke NFPA 130 (ASTM E 662): passed
• Smoke gas toxicity NFPA 130 (SMP 800C): passed
• Calorimetric heat release NFPA 130 (ASTM E 1354): 27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
• Length: 61 mm
• Width: 8.2 mm
• Height NS 35/7,5: 58.5 mm
• Height NS 35/15: 66 mm
• Height NS 32: 63.5 mm
• Conductor cross section solid min.: 0.5 mm²
• Conductor cross section solid max.: 10 mm²
• Conductor cross section flexible min.: 0.5 mm²
• Conductor cross section flexible max.: 6 mm²
• Conductor cross section AWG min.: 20
• Conductor cross section AWG max.: 8
• Conductor cross section flexible, with ferrule without plastic sleeve min.: 0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.: 6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.: 0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.: 4 mm²
• 2 conductors with same cross section, solid min.: 0.5 mm²
• 2 conductors with same cross section, solid max.: 2.5 mm²
• 2 conductors with same cross section, stranded min.: 0.5 mm²
• 2 conductors with same cross section, stranded max.: 6 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve min.: 0.5 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve max.: 4 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve min.: 0.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve max.: 4 mm²
• Cross section with insertion bridge, solid max.: 10 mm²
• Cross section with insertion bridge, stranded max.: 6 mm²
• Connection method: Screw connection
• Stripping length: 10 mm
• Screw thread: M4
• Tightening torque, min: 1.5 Nm
• Tightening torque max: 1.8 Nm
• Disconnect element: M3 0.6 Nm 0.8 Nm
• REACh SVHC: Lead 7439-92-1