Phoenix Contact 0903048 Electronic Circuit Breaker

Phoenix Contact 0903048 Electronic Circuit Breaker Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 75.0 g
• Custom tariff number: 85362010
• Country of origin: Germany
• Installation instructions: When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted.
• Mounting type: DIN rail: 35 mm
• Color: black
• Flammability rating according to UL 94: V0
• Fuse: Electronic
• Fuse type: Automatic device
• Rated surge voltage: 0.5 kV
• Operating voltage: 24 V DC
• Nominal current IN: 10 A
• Required backup fuse: not required, integrated failsafe element
• Dielectric strength: max. 32 V DC (Load circuit)
• Degree of pollution: 2
• Switching capacity ICN: Active current limitation
• Closed-circuit current range I0: typ. 25 mA ±5 mA (When switched on)
• Height: 83 mm
• Width: 12.5 mm
• Depth: 80 mm
• Height NS 35/7,5: 83 mm
• Height NS 35/15: 90.5 mm
• Ambient temperature (operation): 0 °C ... 50 °C (non-condensing)
• Conductor cross section solid min.: 0.5 mm²
• Conductor cross section solid max.: 16 mm²
• Conductor cross section flexible min.: 0.5 mm²
• Conductor cross section flexible max.: 16 mm²
• Conductor cross section AWG min.: 26
• Conductor cross section AWG max.: 6
• Conductor cross section flexible, with ferrule without plastic sleeve min.: 0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.: 10 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.: 0.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.: 10 mm²
• 2 conductors with same cross section, solid min.: 0.5 mm²
• 2 conductors with same cross section, solid max.: 4 mm²
• 2 conductors with same cross section, stranded min.: 0.5 mm²
• 2 conductors with same cross section, stranded max.: 4 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min.: 0.5 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max.: 2.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min.: 0.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max.: 6 mm²
• Connection method: Screw connection
• Stripping length: 10 mm
• Screw thread: M4
• Tightening torque max: 1.2 Nm
• Standards/specifications: UL 508, CSA 22.2 No. 14, UL 2367, CSA 22.2 No. 142, CSA 22.2 No. 213, UL 1604
• eCl@ss 4.0: 27141116
• eCl@ss 4.1: 27141116
• eCl@ss 5.0: 27141116
• eCl@ss 5.1: 27141116
• eCl@ss 6.0: 27141116
• eCl@ss 7.0: 27141116
• eCl@ss 8.0: 27141116
• ETIM 2.0: EC000899
• ETIM 3.0: EC000899
• ETIM 4.0: EC000899
• ETIM 5.0: EC000899
• UNSPSC 6.01: 30211812
• UNSPSC 7.0901: 39121411
• UNSPSC 11: 39121411
• UNSPSC 12.01: 39121411
• UNSPSC 13.2: 39121411