Phoenix Contact 2320393 Buffer Module

Phoenix Contact 2320393 Buffer Module Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 1480.0 g
• Custom tariff number: 85049091
• Country of origin: China
• Width: 64 mm
• Height: 130 mm
• Depth: 125 mm
• Width with alternative assembly: 122 mm
• Height with alternative assembly: 130 mm
• Depth with alternative assembly: 67 mm
• Degree of protection: IP20
• Ambient temperature (operation): -25 °C ... 80 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Max. permissible relative humidity (operation): ≤ 95 % (at 25 °C, non-condensing)
• Noise immunity: EN 61000-6-2:2005
• Maximum altitude: 2000 m
• Input voltage: 24 V DC
• Current consumption (maximum): 45 A
• Current consumption (idle): 0.1 A
• Current consumption (charging process): 0.7 A
• Fixed connect threshold: < 20 V DC
• Variable connect threshold: (UIN- 1 V)/0.1 s
• Nominal output voltage (24 V DC mains operation): 24 V DC
• Output voltage range (depends on the input voltage): 19.2 V DC ... 27.6 V DC
• Nominal output current (IN): 40 A
• Nominal output voltage (24 V DC battery operation): 24 V DC
• Efficiency: > 99 % (Mains operation, with charged power storage)
• Memory medium: Electrolytic capacitor
• Protection class: III
• MTBF (IEC 61709, SN 29500): > 902000 h (40°C)
• Mounting position: horizontal DIN rail NS 35, EN 60715
• Assembly instructions: Can be aligned: Horizontally 0 mm, vertically 50 mm
• Connection method (input): Screw connection
• Conductor cross section solid min. (input): 0.5 mm²
• Conductor cross section solid max. (input): 16 mm²
• Conductor cross section flexible min. (input): 0.5 mm²
• Conductor cross section flexible max. (input): 16 mm²
• Conductor cross section AWG min. (input): 8
• Conductor cross section AWG max. (input): 6
• Stripping length (input): 10 mm
• Screw thread (input): M4
• Connection method (output): Screw connection
• Conductor cross section solid min. (output): 0.5 mm²
• Conductor cross section solid max. (output): 16 mm²
• Conductor cross section flexible min. (output): 0.5 mm²
• Conductor cross section flexible max. (output): 16 mm²
• Conductor cross section AWG min. (output): 8
• Conductor cross section AWG max. (output): 6
• Stripping length (output): 10 mm
• Screw thread (output): M4
• Output name: Power Good signal output active (high = buffer module charged)
• Output description: Power Good
• Output voltage: + 24 V
• Continuous load current: 20 mA
• Status display: LED "Power Good", green
• Note on status display: Buffer module is loaded: LED ON
• Conductor cross section solid min. (signaling): 0.2 mm²
• Conductor cross section solid max. (signaling): 4 mm²
• Conductor cross section flexible min. (signaling): 0.2 mm²
• Conductor cross section flexible max. (signaling): 2.5 mm²
• Conductor cross section AWG min. (signaling): 24
• Conductor cross section AWG max. (signaling): 12
• Tightening torque, min: 0.5 Nm
• Tightening torque max: 0.6 Nm
• Electromagnetic compatibility: Conformance with EMC Directive 2004/108/EC
• Shock: 30g in each direction, according to IEC 60068-2-27
• Vibration (operation): < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
• Low Voltage Directive: Conformance with LV directive 2006/95/EC
• eCl@ss 4.0: 27040702
• eCl@ss 4.1: 27040702
• eCl@ss 5.0: 27242213
• eCl@ss 5.1: 27242213
• eCl@ss 6.0: 27049190
• eCl@ss 7.0: 27049190
• eCl@ss 8.0: 27049201
• ETIM 3.0: EC001039
• ETIM 4.0: EC000599
• ETIM 5.0: EC000382
• UNSPSC 6.01: 30211510
• UNSPSC 7.0901: 39121011
• UNSPSC 11: 39121011
• UNSPSC 12.01: 39121011
• UNSPSC 13.2: 39121011