Phoenix Contact 2858043 Surge Protection Plug

Phoenix Contact 2858043 Surge Protection Plug Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 20.73 g
• Custom tariff number: 85363090
• Country of origin: Germany
• Height: 45 mm
• Width: 17.7 mm
• Depth: 52 mm
• Horizontal pitch: 1 Div.
• Complete module height: 90 mm
• Complete module width: 17.7 mm
• Complete module depth: 65.5 mm
• Ambient temperature (operation): -40 °C ... 85 °C
• Degree of protection: IP20
• Housing material: PA
• Flammability rating according to UL 94: V0
• Color: black
• Standards for cearances and creepage distances: DIN EN 61664-1, IEC 60664-1
• Mounting type: On base element
• Type: DIN rail module, two-section, divisible
• Number of positions: 3
• Direction of action: Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
• Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10
• IEC test classification: C1, C2, C3, D1
• VDE requirement class: C1, C2, C3, D1
• Nominal voltage UN: 12 V DC
• Maximum continuous voltage UC: 14 V DC, 9.8 V AC
• Maximum continuous voltage UC(wire-wire): 14 V DC, 9.8 V AC
• Maximum continuous voltage UC(wire-ground): 14 V DC (PT 1x2-BE)
• Nominal current IN: 450 mA (45°C)
• Operating effective current ICat UC: ≤ 5 µA
• Residual current IPE: < 5 µA (PT 1x2-BE), < 1 µA (PT 1x2+F-BE)
• Nominal discharge current In(8/20) µs (Core-Core): 10 kA
• Nominal discharge current In(8/20) µs (Core-Earth): 10 kA
• Nominal discharge current In(8/20) µs (Core-GND): 10 kA
• Total surge current (8/20) µs: 20 kA
• Max. discharge current Imax(8/20) µs maximum (Core-Core): 10 kA
• Max. discharge current Imax(8/20) µs maximum (Core-Earth): 10 kA
• Nominal pulse current Ian (10/1000) µs (Core-Core): 67 A
• Impulse discharge current (10/350) µs, peak value limp: 2.5 kA
• Output voltage limitation at 1 kV/µs (Core-Core) spike: ≤ 55 V
• Output voltage limitation at 1 kV/µs (Core-Earth) spike: ≤ 55 V (PT 1x2-BE), ≤ 700 V (PT 1x2+F-BE)
• Output voltage limitation at 1 kV/µs (Core-Core) static: ≤ 25 V
• Output voltage limitation at 1 kV/µs (Core-Earth) static: ≤ 25 V, ≤ 40 V (PT 1x2+F-BE)
• Residual voltage at In(conductor-conductor): ≤ 25 V
• Residual voltage at In(conductor-ground): ≤ 40 V (PT 1x2-BE)
• Residual voltage at In(conductor-GND): ≤ 25 V (PT 1x2-BE)
• Residual voltage with Ian (10/1000)µs (conductor-conductor): ≤ 25 V
• Residual voltage with Ian (10/1000)µs (conductor-GND): ≤ 25 V
• Voltage protection level Up(core-core): ≤ 80 V (C1 - 1 kV/500 A), ≤ 50 V (C3 - 25 A), ≤ 100 V (C2 - 10 kV/5 kA), ≤ 80 V (6 kV/3 kA)
• Voltage protection level Up(core-ground): ≤ 85 V (C1 - 1 kV/500 A), ≤ 140 V (C2 - 10 kV/5 kA), ≤ 100 V (6 kV/3 kA), ≤ 50 V (C3 - 25 A)
• Voltage protection level Up(core-GND): ≤ 50 V (C3 - 25 A)
• Response time tA (Core-Core): ≤ 500 ns
• Response time tA (Core-Earth): ≤ 500 ns
• Input attenuation aE, sym.: typ. 0.3 dB (≤ 5 MHz / 100 Ω)
• Cut-off frequency fg (3 dB), sym. in 100 Ohm system: typ. 60 MHz
• Capacity (Core-Core): typ. 30 pF
• Resistance in series: 2.2 Ω ±10 % (7-8/11-12)
• Surge protection fault message: None
• Max. required back-up fuse: 500 mA (e.g. T in acc. with IEC 127-2/III)
• Impulse durability (conductor-conductor): C2 - 10 kV/5 kA, C3 (67 A)
• Impulse durability (conductor-ground): C2 - 10 kV/5 kA, C3 (67 A), D1 - 2,5 kA
• Connection method: Screw connection (in connection with the base element)
• Connection type IN: PLUGTRAB plug-in system
• Connection type OUT: PLUGTRAB plug-in system
• Screw thread: M3
• Tightening torque: 0.8 Nm
• Stripping length: 8 mm
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 2.5 mm²
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 4 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 12