Phoenix Contact 2961341 Miniature Power Relay

Phoenix Contact 2961341 Miniature Power Relay Specifications:

• Packing unit: 1 pc
• Minimum order quantity: 10 pc
• GTIN: 4017918187569
• Weight per Piece (excluding packing): 16.060 g
• Custom tariff number: 85366990
• Country of origin: Austria
• Width: 12.7 mm
• Height: 29 mm
• Depth: 15.7 mm
• Ambient temperature (operation): -40 °C ... 85 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Maximum altitude: ≤ 2000 m
• Degree of protection: RT II
• Nominal input voltage UN: 24 V DC
• Input voltage range in reference to UN: see diagram
• Typical input current at UN: 17 mA
• Typical response time: 8 ms
• Typical release time: 3 ms
• Coil resistance: 1440 Ω ±10 % (20 °C)
• Power dissipation for nominal condition: 0.41 W
• Contact type: 1 N/O contact
• Type of switch contact: Single contact
• Contact material: AgSnO
• Maximum switching voltage: 250 V AC/DC
• Minimum switching voltage: 12 V (100 mA)
• Min. switching current: 100 mA (at 12 V DC)
• Maximum inrush current: 80 A (20 ms)
• Peak inrush current: 130 A (peak, at capacitive load, 230 V AC, 24 μF)
• Limiting continuous current: 16 A
• Interrupting rating (ohmic load) max.: 4000 VA (for 250 V AC)
• Switching capacity min.: 1200 mW
• Switching capacity: 6 A (at 250 V, AC15)
• Motor load according to UL 508: 1 HP, 250 V AC (N/O contact)
• Test voltage relay winding/relay contact: 5 kV AC (50 Hz, 1 min.)
• Operating mode: 100% operating factor
• Mechanical service life: 3x 10^7 cycles
• Mounting position: any
• Assembly instructions: Can be aligned without spacing (> 70 °C ≥ 2.5 mm)
• Connection method: Solder connection
• Connection in acc. with standard: CUL
• Standards/regulations: EN 61810-1
• Rated insulation voltage: 250 V AC
• Rated surge voltage: 6 kV
• Insulation: Safe isolation, reinforced insulation
• Pollution degree: 3
• Overvoltage category: III
• China RoHS: No hazardous substances above threshold values