Phoenix Contact 2981428 Safety Relay

Phoenix Contact 2981428 Safety Relay Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 472.4 g
• Custom tariff number: 85371099
• Country of origin: Germany
• Width: 45 mm
• Height: 99 mm
• Depth: 114.5 mm
• Ambient temperature (operation): -20 °C ... 55 °C
• Ambient temperature (storage/transport): -40 °C ... 70 °C
• Max. permissible relative humidity (operation): 75%
• Max. permissible humidity (storage/transport): 75%
• Shock: 15g
• Vibration (operation): 10 Hz ...150 Hz, 2g
• Maximum altitude: ≤ 2000 m
• Rated control circuit supply voltage US: 24 V DC -15 % / +10 %
• Power consumption at US: typ. 3.72 W
• Rated control supply current IS: typ. 155 mA
• Typical inrush current: 200 mA (at US)
• Current consumption: {'with Us/Ixto S10': '< 40 mA', 'with Us/Ixto S12': '< 50 mA', 'with Us/Ixto S22': '> -40 mA', 'with Us/Ixto S34': '0 mA', 'with Us/Ixto S35': '< 5 mA'}
• Voltage at input/start and feedback circuit: 24 V DC -15 % / +10 %
• Typical response time (automatic start): < 600 ms
• Typical pick-up time: < 600 ms
• Typical release time (controlled via S11/S12 and S21/S22): < 20 ms
• Typical release time (controlled via A1): < 20 ms
• Concurrence input 1/2: ∞
• Recovery time: < 1 s
• Status display: 4 x green LEDs
• Maximum switching frequency: 0.5 Hz
• Max. permissible overall conductor resistance: approx. 22 Ω
• Filter time: {'at A1 in the event of voltage dips at Us': '1 ms', 'at S10, S12; test pulse width': 'max. 1.5 ms', 'at S10, S12; test pulse rate': '7.5 ms'}
• Contact type: 3 enabling current paths undelayed
• Contact material: AgSnO2
• Minimum switching voltage: 5 V AC/DC
• Maximum switching voltage: 250 V AC/DC
• Limiting continuous current (N/O contact): 6 A
• Limiting continuous current (N/C contact): 6 A
• Minimum switching current: 10 mA
• Maximum inrush current (undelayed contacts): 20 A
• Maximum inrush current (delayed contacts): 8 A
• Sq. Total current: 55 A
• Interrupting rating (ohmic load) max. (24 V DC, τ = 0 ms): 144 W
• Interrupting rating (ohmic load) max. (48 V DC, τ = 0 ms): 288 W
• Interrupting rating (ohmic load) max. (110 V DC, τ = 0 ms): 110 W
• Interrupting rating (ohmic load) max. (220 V DC, τ = 0 ms): 88 W
• Interrupting rating (ohmic load) max. (250 V AC, τ = 0 ms): 1500 VA
• Maximum interrupting rating (inductive load) (24 V DC, τ = 40 ms): 42 W
• Maximum interrupting rating (inductive load) (48 V DC, τ = 40 ms): 42 W
• Maximum interrupting rating (inductive load) (110 V DC, τ = 40 ms): 42 W
• Maximum interrupting rating (inductive load) (220 V DC, τ = 40 ms): 42 W
• Switching capacity min.: 50 mW
• Output fuse (N/O contact): 10 A gL/gG
• Output fuse (N/C contact): 6 A gL/gG
• Relay type: Electromechanical relay
• Mechanical service life: 10 x 10^6 cycles
• Net weight: 460 g
• Mounting type: DIN rail mounting
• Degree of protection: IP54
• Mounting position: any
• Control: one and two channel
• Housing material: PBT
• Stop category: 0, 1
• Safety Integrity Level (SIL) (delayed contacts): 3 (SIL 2)
• Performance level (PL) (delayed contacts): d
• Category (undelayed contacts): 4
• Safety Integrity Level Claim Limit (SIL CL) (delayed contacts): 3 (SILCL 2)
• Air clearances and creepage distances: DIN EN 50178/VDE 0160
• Rated insulation voltage: 250 V AC
• Rated surge voltage/insulation: Basic insulation 4 kV, Safe isolation, reinforced insulation 6 kV
• Degree of pollution: 2
• Overvoltage category: III
• eCl@ss 4.0: 27371102
• eCl@ss 4.1: 27371102
• eCl@ss 5.0: 27371901
• eCl@ss 5.1: 27371901
• eCl@ss 6.0: 27371819
• eCl@ss 7.0: 27371819
• eCl@ss 8.0: 27371819
• ETIM 2.0: EC001449