Phoenix Contact 3046786 UTTB 4 RD Terminal Block

Phoenix Contact 3046786 UTTB 4 RD Terminal Block Specifications:

• Number of levels: 2
• Number of connections: 4
• Nominal cross section: 4 mm²
• Color: red
• Insulating material: PA
• Flammability rating according to UL 94: V0
• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 1.02 W
• Connection in acc. with standard: IEC 60947-7-1
• Nominal current IN: 30 A
• Maximum load current: 36 A
• Nominal voltage UN: 800 V
• Open side panel: Yes
• Shock protection test specification: IEC 60529:2001-02
• Finger protection: guaranteed
• Result of surge voltage test: Test passed
• Surge voltage test setpoint: 9.8 kV
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 2 kV
• Checking the mechanical stability of terminal points: Test passed
• Result of bending test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Bending test conductor cross section: 0.14 mm² / 0.2 kg, 4 mm² / 0.9 kg, 6 mm² / 1.4 kg
• Tensile test result: Test passed
• Conductor cross section tensile test: 0.14 mm² (10 N), 4 mm² (120 N), 6 mm² (80 N)
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 35
• Setpoint: 5 N
• Result of voltage-drop test: Test passed
• Requirements, voltage drop: ≤ 3.2 mV
• Result of temperature-rise test: Test passed
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing: 4 mm² (0.48 kA), 6 mm² (0.72 kA)
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s
• Oscillation, broadband noise test result: Test passed
• Test specification, oscillation, broadband noise: DIN EN 50155 (VDE 0115-200):2008-03
• Test spectrum: Service life test category 1, class B, body mounted
• Test frequency: f1= 5 Hz to f2= 150 Hz
• ASD level: 1.857 m/s² / 2/Hz
• Acceleration: 0.8 g
• Test duration per axis: 5 h
• Test directions: X-, Y- and Z-axis (pos. and neg.)
• Shock test result: Test passed
• Test specification, shock test: DIN EN 50155 (VDE 0115-200):2008-03
• Shock form: Half-sine
• Shock acceleration: 5 g
• Shock duration: 30 ms
• Number of shocks per direction: 3
• Width: 6.2 mm
• Length: 69.9 mm
• Height NS 35/7,5: 65 mm
• Height NS 35/15: 72.5 mm
• Connection method: Screw connection
• Conductor cross section solid min: 0.14 mm²
• Conductor cross section solid max: 6 mm²
• Conductor cross section flexible min: 0.14 mm²
• Conductor cross section flexible max: 6 mm²
• Conductor cross section AWG min: 26
• Conductor cross section AWG max: 10
• Conductor cross section flexible, with ferrule without plastic sleeve min: 0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max: 4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min: 0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max: 4 mm²
• Stripping length: 9 mm
• Internal cylindrical gage: A4
• Screw thread: M3
• Tightening torque, min: 0.6 Nm
• Tightening torque max: 0.8 Nm