Phoenix Contact PLCRPT230UC21AU 230V AC Relay Module

Phoenix Contact PLCRPT230UC21AU 230V AC Relay Module Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 36.0 g
• Custom tariff number: 85364900
• Country of origin: Germany
• Ambient temperature (operation): -40 °C ... 55 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Nominal input voltage UN: 230 V AC / 220 V DC
• Typical input current at UN: 3.2 mA (at UN= 230 V AC) / 3 mA (at UN= 220 V DC)
• Typical response time: 7 ms
• Typical release time: 15 ms
• Protective circuit: Bridge rectifier
• Operating voltage display: Yellow LED
• Power dissipation for nominal condition: 0.74 W
• Contact type: 1 PDT
• Contact material: AgSnO, hard gold-plated
• Maximum switching voltage: 30 V AC / 36 V DC
• Minimum switching voltage: 100 mV (at 10 mA)
• Min. switching current: 1 mA (at 24 V)
• Maximum inrush current: 50 mA
• Limiting continuous current: 50 mA
• Interrupting rating (ohmic load) max.: 1.2 W (at 24 V DC)
• Maximum switching voltage (gold layer destroyed): 250 V AC/DC
• Minimum switching voltage (gold layer destroyed): 5 V (at 100 mA)
• Limiting continuous current (gold layer destroyed): 6 A
• Min. switching current (gold layer destroyed): 10 mA (at 12 V)
• Interrupting rating (ohmic load) max. (gold layer destroyed): 140 W (at 24 V DC) / 20 W (at 48 V DC) / 18 W (at 60 V DC) / 23 W (at 110 V DC) / 40 W (at 220 V DC) / 1500 VA (for 250 V AC)
• Switching capacity in acc. with DIN VDE 0660/IEC 60947: 2 A (at 24 V, DC13) / 0.2 A (at 110 V, DC13) / 0.1 A (at 220 V, DC13) / 3 A (at 24 V, AC15) / 3 A (at 120 V, AC15) / 3 A (at 230 V, AC15)
• Connection name (Coil side): Coil side
• Connection method (Coil side): Push-in connection
• Stripping length (Coil side): 8 mm
• Conductor cross section solid (Coil side): 0.14 mm² ... 2.5 mm²
• Conductor cross section flexible (Coil side): 0.14 mm² ... 2.5 mm²
• Conductor cross section AWG (Coil side): 26 ... 14
• Connection name (Contact side): Contact side
• Connection method (Contact side): Push-in connection
• Stripping length (Contact side): 8 mm
• Conductor cross section solid (Contact side): 0.14 mm² ... 2.5 mm²
• Conductor cross section flexible (Contact side): 0.14 mm² ... 2.5 mm²
• Conductor cross section AWG (Contact side): 26 ... 14
• Test voltage relay winding/relay contact: 4 kV AC (50 Hz, 1 min.)
• Operating mode: 100% operating factor
• Degree of protection: RT III (Relay)
• Mechanical service life: 2 x 10⁷ cycles
• Flammability rating according to UL 94: V0
• Standards/regulations: IEC 60664 / IEC 60664A / DIN VDE 0110 / DIN EN 50178/DIN VDE 0160 / IEC 60255/DIN VDE 0435
• Degree of pollution: 3
• Overvoltage category: III
• Mounting position: any
• Assembly instructions: In rows with zero spacing
• Connection in acc. with standard: CUL