Phoenix Contact PSRSCP24DCESP42X11X2 Safety Relay

Phoenix Contact PSRSCP24DCESP42X11X2 Safety Relay Specifications:

• Packing unit: 1 STK
• GTIN: None
• Width: 22.5 mm
• Height: 99 mm
• Depth: 114.5 mm
• Ambient temperature (operation): -20 °C ... 55 °C
• Ambient temperature (storage/transport): -40 °C ... 70 °C
• Max. permissible relative humidity (operation): 75 %
• Max. permissible humidity (storage/transport): 75 %
• Maximum altitude: ≤ 2000 m
• Nominal input voltage UN: 24 V DC
• Input voltage range in reference to UN: 0.85 ... 1.1
• Typical input current at UN: 50 mA DC
• Typical inrush current: < 1 A
• Voltage at input/start and feedback circuit: 24 V DC
• Typical response time: 60 ms
• Typical release time: 20 ms
• Recovery time: approx. 1 s
• Contact type: 2 enabling current paths
• Signaling current path: 1 signaling current path (type B according to EN 50205)
• Contact material: AgSnO2, gold-flashed
• Minimum switching voltage: 10 V
• Maximum switching voltage: 250 V AC/DC
• Limiting continuous current (N/O contact/N/C contact, high demand): 6 A
• Limiting continuous current (N/O contact/N/C contact, low demand): 4 A
• Minimum switching current: 10 mA
• Maximum switching current: 6 A
• Sq. Total current: 72 A
• Interrupting rating (ohmic load) max. (24 V DC, τ = 0 ms): 144 W
• Interrupting rating (ohmic load) max. (48 V DC, τ = 0 ms): 200 W
• Interrupting rating (ohmic load) max. (110 V DC, τ = 0 ms): 77 W
• Interrupting rating (ohmic load) max. (220 V DC, τ = 0 ms): 70 W
• Interrupting rating (AC load) max. (250 V AC, τ = 0 ms): 1500 VA
• Maximum interrupting rating (inductive load) (24 V DC, τ = 40 ms): 42 W
• Maximum interrupting rating (inductive load) (48 V DC, τ = 40 ms): 40 W
• Maximum interrupting rating (inductive load) (110 V DC, τ = 40 ms): 35 W
• Maximum interrupting rating (inductive load) (220 V DC, τ = 40 ms): 33 W
• Switching capacity min.: 0.2 W
• Output fuse (High demand): 6 A gL/gG NEOZED
• Output fuse (Low demand): 4 A gL/gG NEOZED
• Relay type: Electromechanical relay with forcibly guided contacts in accordance with EN 50205
• Mechanical service life: Approx. 10 cycles
• Net weight: 24 g
• Mounting type: DIN rail mounting
• Degree of protection: IP54, IP20
• Min. degree of protection of inst. location: IP54
• Mounting position: On horizontal and vertical DIN rail
• Control: single-channel
• Housing material: Polyamide PA non-reinforced
• Connection method: Screw connection
• pluggable: Yes
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 2.5 mm²
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 2.5 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 12
• Stripping length: 7 mm
• Screw thread: M3
• Stop category: 0
• Designation (IEC 61508 - High demand): IEC 61508 - High demand
• Safety Integrity Level (SIL) (IEC 61508): 1 (up to SIL 3 depending on the application)
• Designation (IEC 61508 - Low demand): IEC 61508 - Low demand
• Safety Integrity Level (SIL) (EN ISO 13849): 1 (up to SIL 3 depending on the application)
• Designation (EN ISO 13849): EN ISO 13849
• Performance level (PL): c (up to PL e depending on the application)
• Category (EN ISO 13849): 1 (up to Cat. 4 depending on the application)
• Designation (EN 62061): EN 62061
• Safety Integrity Level Claim Limit (SIL CL): 1 (up to SILCL 3 depending on the application)
• Rated insulation voltage: 250 V
• Rated surge voltage/insulation: 6 kV / Safe isolation, increased insulation
• Degree of pollution: 2
• Overvoltage category: III