Phoenix Contact QUINT4PS1AC24DC13PT 24V DC 1.3A Power Supply

Phoenix Contact QUINT4PS1AC24DC13PT 24V DC 1.3A Power Supply Specifications:

• Packing unit: 1 pc
• GTIN: 4055626356471
• Weight per Piece (excluding packing): 240.000 g
• Custom tariff number: 85044030
• Country of origin: Germany
• Width: 22.5 mm
• Height: 106 mm
• Depth: 90 mm
• Degree of protection: IP20
• Ambient temperature (operation): -25 °C ... 70 °C
• Ambient temperature (start-up type tested): -40 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Max. permissible relative humidity (operation): ≤ 95 %
• Climatic class: 3K3
• Degree of pollution: 2
• Installation height: ≤ 5000 m
• Input voltage range: 100 V AC ... 240 V AC or 110 V DC ... 250 V DC
• Dielectric strength maximum: 300 V AC 30 s
• Frequency range (fN): 50 Hz ... 60 Hz
• Discharge current to PE: < 0.25 mA
• Current consumption (100 V AC): 0.46 A
• Current consumption (120 V AC): 0.37 A
• Current consumption (230 V AC): 0.2 A
• Current consumption (240 V AC): 0.2 A
• Nominal power consumption: 37 VA
• Inrush current: typ. 5.9 A
• Mains buffering time: typ. 43 ms
• Input fuse: 3.15 A
• Type of protection: Transient surge protection
• Protective circuit/component: Varistor
• Nominal output voltage: 24 V DC
• Setting range of the output voltage: 24 V DC ... 28 V DC
• Nominal output current (IN): 1.3 A
• Static Boost: 1.625 A
• Dynamic Boost: 2.6 A
• Derating: > 60 °C (2.5%/K)
• Connection in parallel: Yes
• Connection in series: Yes
• Feedback voltage resistance: ≤ 35 V DC
• Protection against overvoltage at the output: ≤ 32 V DC
• Control deviation: < 0.5 % (Static load change) or < 2 % (Dynamic load change)
• Residual ripple: < 40 mVPP
• Output power: 30 W
• Typical response time: 500 ms
• Maximum power dissipation in no-load condition: < 0.4 W
• Power loss nominal load max.: < 3.7 W
• Net weight: 0.188 kg
• Efficiency: typ. 89.2 % or typ. 90.7 %
• Insulation voltage input/output: 4 kV AC
• Protection class: II
• MTBF: > 1904000 h
• Assembly instructions: DIN rail mounting
• Conductor cross section solid min. (input/output): 0.2 mm²
• Conductor cross section solid max. (input/output): 2.5 mm²
• Conductor cross section flexible min. (input/output): 0.2 mm²
• Conductor cross section flexible max. (input/output): 2.5 mm²
• Conductor cross section AWG min. (input/output): 24
• Conductor cross section AWG max. (input/output): 14
• Stripping length: 10 mm
• EMC requirements for noise immunity: EN 61000-6-1 or EN 61000-6-2
• EMC requirements for noise emission: EN 61000-6-3
• Standard - Safety of transformers: EN 61558-2-16
• Standard - Electrical safety: IEC 61010-2-201
• Standard - safety for equipment for measurement, control, and laboratory use: IEC 61010-1
• Standard – Limitation of mains harmonic currents: EN 61000-3-2
• UL approvals: UL Listed UL 61010-1, UL Listed UL 61010-2-201, UL 1310 Class 2, ANSI/UL 121201