WEIDMULLER 0126700000 Feed-through Terminal Block

WEIDMULLER 0126700000 Feed-through Terminal Block Specifications:

• Type: SAKH 10 EP/SW
• Order No.: 0126700000
• Version: Screw connection, for screwable cross-connection, One end without connector
• GTIN(EAN): 4008190033156
• Quantity: 50 pc(s).
• Width: 14 mm
• Height: 57 mm
• Depth: 76.5 mm
• Net weight: 45.2 g
• Width(inches): 0.551 inch
• Height(inches): 2.244 inch
• Depth(inches): 3.012 inch
• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 160 °C
• Material: Epoxyresin,EP
• UL 94 flammability rating: V-0
• Colour: black
• Certificate No.(ATEX): TUEV18ATEX8206U
• Max. voltage(ATEX): 1100 V
• Wire cross section max.(ATEX): 16 mm²
• Current(IECEX): 57 A
• Certificate No.(IECEX): IECEXTUR18.0016U
• Ex 2014/34/EU label: II 2 G D
• Marking EN 60079-7: Ex eb II C Gb
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 32
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1501714
• Current size C(CSA): 76 A
• Voltage size B(CSA): 600 V
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 14 AWG
• Current size B(CSA): 76 A
• Current size D(CSA): 5 A
• Voltage size C(CSA): 1000 V
• Wire cross section max.(CSA): 6 AWG
• Blade size: 1.0 x 5.5 mm
• Clamping range,min.: 1.5 mm²
• Connection cross-section, stranded, max.: 16 mm²
• Gauge to IEC 60947-1: B6
• Strippinglength: 12 mm
• Tightening torque, min.: 1.2 Nm
• Twin wire-end ferrules,max.: 6 mm²
• Type of connection: Screw connection
• Wire connection cross section AWG,min.: AWG 14
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 10 mm²
• Wire connection cross-section, finely stranded,min.: 2.5 mm²
• Wire connection cross-section, solid core, min.: 1.5 mm²
• Clamping range,max.: 16 mm²
• Clampingscrew: M 4
• Connection direction: on side
• Number of connections: 2
• Tightening torque,max.: 1.2 Nm
• Torque level with DMS electric screwdriver: 4
• Twin wire-end ferrules,min.: 0.75 mm²
• Wire connection cross section AWG,max.: AWG 6
• Wire connection cross section, finely stranded,max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 1 mm²
• Wire connection cross-section, solid core,max.: 16 mm²
• Rated cross-section: 10 mm²
• Rated current: 57 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3
• Rated voltage: 1,000 V
• Current at maximum wires: 57 A
• Volume resistance according to IEC 60947-7-x: 0.56 mΩ
• Rated impulse withstand voltage: 8 kV
• Certificate No.(UR): E60693
• Current size B(UR): 65 A
• Current size C(UR): 65 A
• Current size D(UR): 5 A
• Voltage size B(UR): 600 V
• Voltage size C(UR): 600 V
• Voltage size D(UR): 600 V
• Wire cross section max.(UR): 6 AWG