WEIDMULLER 0134920000 Feed-through Terminal Block

WEIDMULLER 0134920000 Feed-through Terminal Block Specifications:

• Width: 10 mm
• Height: 65 mm
• Depth: 52.5 mm
• Net weight: 35.34 g
• Width(inches): 0.394 inch
• Height(inches): 2.559 inch
• Depth(inches): 2.067 inch
• Storage temperature,max: 40 °C
• Storage temperature: 10 °C...40 °C
• Continuous operating temp., max: 130 °C
• Storage temperature,min: 10 °C
• Continuous operatingtemp.,min: -60 °C
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: mediumyellow
• Version: Screw connection, for screwable cross-connection, One end without connector
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 32
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: right
• Certificate No.(CSA): 12400-184
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 18 AWG
• Current size C(CSA): 45 A
• Wire cross section max.(CSA): 8 AWG
• Blade size: 1.0 x 5.5 mm
• Clampingrange,min: 0.5 mm²
• Connection cross-section, stranded, max: 10 mm²
• Connection direction: on side
• Number of connections: 2
• Tighteningtorque,max: 2.4 Nm
• Torque level with DMS electric screwdriver: 4
• Wire connection cross section AWG, max: AWG 8
• Wire connection cross-section, finely stranded, max: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min: 0.5 mm²
• Wire connection cross-section, solid core, max: 10 mm²
• Clampingrange,max: 10 mm²
• Clampingscrew: M 4
• Connection cross-section, stranded, min: 1.5 mm²
• Gauge to IEC 60947-1: B6
• Strippinglength: 12 mm
• Tighteningtorque,min: 1.2 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min: AWG 18
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max: 10 mm²
• Wire connection cross-section, finely stranded, min: 0.5 mm²
• Wire connection cross-section, solid core, min: 0.5 mm²
• Rated cross-section: 10 mm²
• Rated current: 57 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3
• Rated voltage: 500 V
• Current at maximum wires: 57 A
• Volume resistance according to IEC 60947-7-x: 0.56 mΩ
• Rated impulse withstand voltage: 6 kV
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11