WEIDMULLER 1123580000 TRS 24-230VUC 2CO Relay Module

WEIDMULLER 1123580000 TRS 24-230VUC 2CO Relay Module Specifications:

• Type: TRS 24-230VUC 2CO
• Order No.: 1123580000
• Version: TERMSERIES, Relay module, No. of contacts: 2
• Rated control voltage: 24...230 V UC ± 10 %
• Continuous current: 8 A
• Connection type: Screw connection
• GTIN(EAN): 4032248905638
• Quantity: 10 pc(s).
• Width: 12.8 mm
• Height: 89.6 mm
• Depth: 87.8 mm
• Net weight: 61 g
• Width (inches): 0.504 inch
• Height (inches): 3.528 inch
• Depth (inches): 3.457 inch
• Humidity: 5–95% rel. humidity, Tu=40°C,no condensation
• Operating temperature, min: -40 °C
• Storage temperature, min: -40 °C
• Storage temperature: -40 °C...85 °C
• Operating temperature, max: 40 °C
• Storage temperature, max: 85 °C
• Rated current DC: 45 mA @ 24 VUC
• Pull-in/drop-out voltage, typ.: 18.5 V / 7 V AC, 17.5 V/5 V DC
• Status indicator: Green LED
• Power rating: 1.08 W @ 24 V UC, 1.38 W @ 230 V UC
• Pull-in/drop-out current, typ.: 42 mA / 14 mA AC, 38 mA/10 mA DC
• Protective circuit: Rectifier
• Rated switching voltage: 250 V AC
• Max. switching voltage, DC: 250 V
• Inrush current: 15 A/4 s
• DC switching capacity (resistive), max.: 192 W @ 24 V
• Switch-off delay: < 100 ms
• Max. switching frequency at rated load: 0.1 Hz
• AC switching capacity (resistive), max.: 2000 VA
• Switch-on delay: < 40 ms
• Min. switching power: 10 mA @ 10 V, 100 mA @ 5 V
• Contact type: 2 CO contact (AgNi)
• Mechanical service life: 30 x 106 switching cycles
• Mounting rail: TS 35
• Mechanical switch position indicator: No
• Color: Black
• Rated voltage: 300 V
• Pollution severity: 2
• Dielectric strength input – output: 1.2 kVeff/ 5 s
• Dielectric strength of neighboring contacts: 2.5 kVeff
• Dielectric strength to mounting rail: 4 kVeff/ 1 min.
• Surge voltage category: III
• Protection degree: IP20
• Creepage and clearance distance input – output: ≥ 5.5 mm
• Dielectric strength of open contact: 1 kVeff/ 1 min.
• Impulse withstand voltage: 6 kV (1.2/50 µs)
• Standards: EN 50178, EN 55011, EN 61000-6-1,2,4
• Certificate no. (cULus): E141197
• Certificate No. (DNVGL): TAA00001E5
• Wire connection method: Screw connection
• Tightening torque, max.: 0.4 Nm
• Clamping range, min.: 0.14 mm²
• Wire cross-section AWG, min.: AWG 26
• Wire cross-section, solid, min.: 0.14 mm²
• Wire cross-section, finely stranded, min.: 0.14 mm²
• Wire cross-section, finely stranded, min. (AWG): AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.25 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 0.25 mm²
• Wire cross-section, finely stranded, two clampable wires, min.: 0.5 mm²
• Twin wire-end ferrules, min.: 0.5 mm²
• Blade size: size PH0
• Stripping length, rated connection: 8 mm
• Clamping range, rated connection: 1.5 mm²
• Clamping range, max.: 2.5 mm²
• Wire cross-section AWG, max.: AWG 14
• Wire cross-section, solid, max.: 2.5 mm²
• Wire cross-section, finely stranded, max.: 2.5 mm²
• Wire cross-section, finely stranded, max. (AWG): AWG 14
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 2.5 mm²
• Wire cross-section, finely stranded, two clampable wires, max.: 1 mm²
• Twin wire-end ferrules, max.: 1 mm²
• Gauge to IEC 60947-1: A1, B1
• Ambient temperature (operational), max.: 40 °C
• Connection cross-section AWG, max.: AWG 14
• Type of conductor: rigid copper conductor, flexible copper conductor
• Pollution severity level: 2
• ETIM 5.0: EC001437
• eClass 6.2: 27-37-16-01
• eClass 8.1: 27-37-16-01
• eClass 9.1: 27-37-16-01
• ETIM 6.0: EC001437
• eClass 7.1: 27-37-16-01
• eClass 9.0: 27-37-16-01