WEIDMULLER 1704570000 Feed-through Terminal Block

WEIDMULLER 1704570000 Feed-through Terminal Block Specifications:

• Type: ZDUB 2.5-2/4AN/DM GE
• Order No.: 1704570000
• Version: Tension-clamp connection, can only be bridged at the clamping point, One end without connector
• GTIN(EAN): 4008190948313
• Qty.: 100 pc(s).
• Width: 10.2 mm
• Height: 33.5 mm
• Depth: 24 mm
• Net weight: 7.57 g
• Width(inches): 0.402 inch
• Height(inches): 1.319 inch
• Depth(inches): 0.945 inch
• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: yellow
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 2.5 mm²
• Current(IECEX): 21 A
• Certificate No.(IECEX): IECEXULD16.0036U
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 2.5 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Number of potentials: 1
• Number of clamping points per level: 4
• Levels cross-connected internally: Yes
• N-function: No
• PEN function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• PE function: No
• Explosion-tested version: Yes
• Open sides: right
• Installation advice: Direct mounting
• Type of mounting: Direct mounting
• Certificate No.(CSA): 12400-379
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 26 AWG
• Current size C(CSA): 25 A
• Wire cross section max.(CSA): 12 AWG
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.13 mm²
• Gauge to IEC 60947-1: A2
• Strippinglength: 10 mm
• Wire connection cross section AWG,max.: AWG 12
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 4 mm²
• Clampingrange,max.: 4 mm²
• Connection direction: top
• Number of connections: 4
• Type of connection: Tension-clampconnection
• Wire connection cross section AWG,min.: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 1.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 30 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 8 kV