WEIDMULLER 1771360000 Z-Series Spring Clamp Terminal

WEIDMULLER 1771360000 Z-Series Spring Clamp Terminal Specifications:

• Width: 8.1 mm
• Height: 68 mm
• Depth: 49.19 mm
• Depth including DIN rail: 50 mm
• Width(inches): 0.319 inch
• Height(inches): 2.677 inch
• Depth(inches): 1.937 inch
• Net weight: 24.74 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: Green/yellow
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Wire cross section max.(ATEX): 10 mm²
• Certificate No.(IECEX): IECEXULD16.0036U
• Wire cross section max.(IECEX): 10 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Version: Tension-clamp connection, With PE connection, One end without connector
• Number of levels: 1
• Levels cross-connected internally: No
• Rail: TS 35
• End cover plate required: Yes
• Number of clamping points per level: 3
• PE connection: Yes
• PEN function: No
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1152892
• Wire cross section min. (CSA): 20 AWG
• Wire cross section max.(CSA): 8 AWG
• Rated short-time current: 720 A (6 mm²)
• Rated cross-section: 6 mm²
• Standards: IEC 60947-7-2
• Power loss in accordance with IEC 60947-7-x: 1.31 W
• Pollution severity: 3
• Rated voltage to adjoining terminal: 800 V
• Volume resistance according to IEC 60947-7-x: 0.78 mΩ
• Rated impulse withstand voltage to adjacent terminal: 8 kV
• ETIM 6.0: EC000901
• eClass 9.0: 27-14-11-41
• eClass 10.0: 27-14-11-41
• ETIM 7.0: EC000901
• eClass 9.1: 27-14-11-41
• UNSPSC: 30-21-18-11
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.22 mm²
• Gauge to IEC 60947-1: A5
• Strippinglength: 12 mm
• Wire connection cross section AWG,max.: AWG 8
• Wire connection cross section, finely stranded, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 10 mm²
• Clampingrange,max.: 10 mm²
• Connection direction: Inclined/angled
• Number of connections: 3
• Type of connection: Tension-clampconnection
• Wire connection cross section AWG,min.: AWG 22
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 6 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 6 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²