WEIDMULLER 1905140000 Feed-through Terminal Block

WEIDMULLER 1905140000 Feed-through Terminal Block Specifications:

• Type: Feed-through terminal
• Version: Screw connection, 4 mm², 800 V, 32 A, Dark Beige
• GTIN(EAN): 4032248523399
• Quantity: 50 pc(s).
• Width: 6.1 mm
• Height: 63.5 mm
• Depth: 53 mm
• Depth including DIN rail: 53.5 mm
• Width(inches): 0.24 inch
• Height(inches): 2.5 inch
• Depth(inches): 2.087 inch
• Net weight: 10.909 g
• Continuous operating temp., min.: -50 °C
• Continuous operating temp., max.: 130 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: Dark Beige
• Certificate No.(ATEX): DEMKO14ATEX1338U
• Max. voltage(ATEX): 690 V
• Wire cross section max.(ATEX): 4 mm²
• Current(IECEX): 31 A
• Voltage, cross-connection: CrossConnectionGuide.pdf
• Marking EN 60079-7: Ex e II
• Certificate No.(IECEX): IECEXULD14.0005U
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Ex 2014/34/EU label: II 2 G D
• Number of potentials: 1
• No. of clamping points per level: 3
• Levels cross-connected internally: No
• Mounting rail: TS 35
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Wire connection cross section, finely stranded, two clampable wires, min.: 0.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.: 0.5 mm²
• Wire cross-section, finely stranded, two clampable wires, max.: 1.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max.: 1.5 mm²
• Explosion-tested version: Yes
• Type of mounting: Snap-on
• Open sides: right
• Certificate No.(CSA): 200039-1057876
• Current size C(CSA): 30 A
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 30 AWG
• Current size B(CSA): 30 A
• Voltage size B(CSA): 600 V
• Wire cross section max.(CSA): 10 AWG
• Blade size, additional connection: 0.6 x 3.5 mm
• Clamping range, further connection, min.: 0.5 mm²
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.: 0.5 mm²
• Clamping range, further connection, max.: 6 mm²
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 4 mm²
• Conductor cross-section, flexible, further connection, min.: 0.5 mm²
• Conductor cross-section, flexible, further connection, max.: 4 mm²
• Conductor cross-section, solid-core, further connection, min.: 0.5 mm²
• Conductor cross-section, solid-core, further connection, max.: 6 mm²
• Rated cross-section, further connection: 4 mm²
• Strippinglength, additional connection: 10 mm
• Tightening torque, additional connection, max.: 0.8 Nm
• Blade size: 0.6 x 3.5 mm
• Clamping range, rated connection, min.: 0.05 mm²
• Connection direction: on side
• Number of connections: 2
• Tightening torque, max.: 0.8 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 26
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min.: 0.5 mm²
• Wire connection cross section, solid core max. rated connection: 6 mm²
• Wire connection cross section, finely stranded, min.: 0.5 mm²
• Rated cross-section: 4 mm²
• Rated current: 32 A
• Standards: IEC 60947-7-1
• Rated impulse withstand voltage: 8 kV
• Rated voltage: 800 V
• Current at maximum wires: 32 A
• Volume resistance according to IEC 60947-7-x: 1 mΩ
• Pollution severity: 3
• Certificate No. (cURus): E60693
• Conductor size Factory wiring min. (cURus): 30 AWG
• Conductor size Field wiring min. (cURus): 30 AWG
• Current size C (cURus): 30 A
• Voltage size C (cURus): 600 V
• Conductor size Factory wiring max. (cURus): 10 AWG
• Conductor size Field wiring max. (cURus): 10 AWG
• Current size B (cURus): 30 A
• Voltage size B (cURus): 600 V
• ETIM 3.0: EC000897
• ETIM 5.0: EC000897