WEIDMULLER 9503300000 Fuse Terminal Block

WEIDMULLER 9503300000 Fuse Terminal Block Specifications:

• Deliverystatus: This article will no longer be available in the future.
• Available until: 2017-12-31
• Type: KDKS 1/32
• Order No.: 9503300000
• Version: Screw connection, Fuse isolator, One end without connector
• GTIN(EAN): 4008190085858
• Qty.: 50pc(s)
• Alternative product: 9503350000
• Width: 8 mm
• Height: 73.5 mm
• Depth: 55.6 mm
• Net weight: 22.28 g
• Width(inches): 0.315 inch
• Height(inches): 2.894 inch
• Depth(inches): 2.189 inch
• Continuous operating temp., min.: -50 °C
• Continuous operating temp., max.: 100 °C
• Material: PA 66
• UL 94 flammability rating: V-2
• Colour: beige/ yellow
• Number of potentials: 2
• No. of clamping points per level: 2
• Levels cross-connected internally: No
• Mountingrail: TS 32
• PE function: No
• End cover plate required: Yes
• Number of levels: 2
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: right
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 4 mm²
• Blade size: 0.6 x 3.5 mm
• Clampingrange,rated connection,min.: 0.33 mm²
• Connection direction: on side
• Number of connections: 4
• Tighteningtorque,max.: 0.8 Nm
• Torque level with DMS electric screwdriver: 2
• Twin wire-end ferrules,min.: 0.5 mm²
• Wire connection cross section AWG, max.: AWG 12
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,min.: 0.5 mm²
• Wire connection cross section, solid core max. rated connection: 4 mm²
• Wire connection cross section, stranded,rated connection,max.: 4 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Clampingrange,rated connection,max.: 4 mm²
• Clampingscrew: M 3
• Gauge to IEC 60947-1: A3
• Strippinglength: 8 mm
• Tighteningtorque,min.: 0.5 Nm
• Twin wire-end ferrules, max.: 1.5 mm²
• Type of connection: Screw connection
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,max.: 4 mm²
• Wire connection cross section, finely stranded, max.: 4 mm²
• Wire connection cross section, solid core,min. rated connection: 0.5 mm²
• Wire connection cross section, stranded,rated connection,min.: 1.5 mm²
• Operating voltage for display, max.: 500 V
• Type of voltage for indicator: AC
• Cartridge fuse: G-Si. 5 x 20
• Fuse holder(cartridge holder): Pivoting
• Display: Without LED
• Operatingvoltage,max.: 500 V
• Rated cross-section: 4 mm²
• Rated current: 6.3 A
• Standards: IEC 60947-7-3
• Rated impulse withstand voltage: 6 kV
• Rated voltage: 500 V
• Current at maximum wires: 6.3 A
• Volume resistance according to IEC 60947-7-x: 1 mΩ
• Pollution severity: 3
• ETIM 3.0: EC000899
• ETIM 5.0: EC000899
• UNSPSC: 30-21-18-11
• eClass 6.2: 27-14-11-16
• eClass 8.1: 27-14-11-16
• eClass 9.1: 27-14-11-16
• ETIM 4.0: EC000899
• ETIM 6.0: EC000899
• eClass 5.1: 27-14-11-16
• eClass 7.1: 27-14-11-16
• eClass 9.0: 27-14-11-16
• Max. power loss (1.6 W) at the cartridge fuse limits the rated current: Yes
• Note: max. conductor connection = 2.5 mm² when using the cross-connector: Yes