AEMC Instruments 6250 Datasheet & Stock

AEMC 6250 Offers

Resistance measurements are automatically calculated and displayed, taking into account the measurement value, ambient temperature, reference temperature and metal temperature coefficient. Sample temperature can be manually entered by the operator or directly measured by the AEMC 6250 with an external RTD temperature probe.

The AEMC 6250 Micro-Ohmmeter is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer of from a PC.

The large, easy-to-read display shows the resistance measurement, ambient and reference temperatures, metal type and test method, as well as alarm conditions and memory utilization, all in real time. Previously stored test results can easily be called up for review on the display or sent directly to a printer or remote terminal.

Two programmable alarm set points are available. Each can be either active high or low and will sound an alarm when tripped, further adding to the ease of use by permitting quick Pass/Fail measurements.

External trigger operation is available through the communication port allowing the test to be conducted from a remote location.

The AEMC 6250 Micro-Ohmmeter (10A) will be a valuable asset for your bond testing, coil and contact testing as well as coatings and connector or any other low resistance testing application.

Features

Measures from 0.0001mΩ (0.1µΩ resolution) to 2500.0Ω
Test current selection of 1mA, 10mA, 100mA, 1A and 10ARTD temperature probe to check tested sample (optional)
Selectable metal types
Automatic and manual temperature correction
EMF levels measured and eliminated in measurement
Two programmable alarm set points
Stores up to 1500 test results
Selectable Inductive and Resistance test modes
Automatic multiple test mode (multiple tests without pressing the button)
Large multi-line electroluminescent display
Local or remote test setup and control
Direct printout
Internal rechargeable batteries - conduct up to 5000 10A tests
Rugged, double insulated waterproof case
CE Mark


Applications

Aerospace metallic coating resistance measurement
Bonding verification on earth/ground systems
Weld joint integrity verification
Contact resistance measurement of breakers and switchgear
Aircraft and rail bonding checks
Wire to terminal connections and resistance checks
Battery strap resistance checks
Cable joint and bus bar connection checks
Mechanical bond tests