Microchip Technology ATMEGA644V-10PU Datasheet & Stock

The ATMEGA644V-10PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 64kB ISP flash memory with read-while-write capabilities, 2kB EEPROM, 4kB SRAM, 32 general purpose I/O lines, 32 general purpose working registers, real time counter, three flexible timers/counters with compare modes and PWM, 2 USARTs, byte oriented 2-wire serial interface, 8-channel/10-bit A/D converter with optional differential input stage with programmable gain, programmable watchdog timer with internal oscillator, SPI serial port, JTAG (IEEE 1149.1 compliant) test interface for on-chip debugging and six software selectable power saving modes. The device operates between 2.7 to 5.5V. By executing powerful instructions in a single clock-cycle, the device achieves throughputs approaching 1MIPS per MHz, balancing power consumption and processing speed.




Advanced RISC architecture

Power-on reset and programmable brown-out detection

Internal calibrated RC oscillator

External and internal interrupt sources

Six sleep modes - idle, ADC noise reduction, power-save, power-down, standby and extended standby

131 powerful instructions-most single clock cycle execution

32 x 8 general purpose working registers

Fully static operation

Up to 20MIPS throughput at 20MHz

JTAG (IEEE std. 1149.1 compliant) interface





Programmable watchdog timer with separate on-chip oscillator

On-chip analogue comparator

Interrupt and wake-up on pin change

Two 8-bit timers/counters with separate prescaler and compare mode

One 16-bit timer/counter with separate prescaler, compare mode and capture mode

Real-time counter with separate oscillator

Six PWM channels

One programmable serial USART

Serial peripheral interface (SPI)