Phoenix Contact 1766686 Feed-through Header

Phoenix Contact 1766686 Feed-through Header Specifications:

• Packing unit: 1 pc
• Minimum order quantity: 250 pc
• GTIN: 4017918032708
• Weight per Piece (excluding packing): 2.600 g
• Custom tariff number: 85366930
• Country of origin: Germany
• Brief article description: Feed-through header
• Plug-in system: CLASSIC COMBICON
• Type of contact: Male connector
• Range of articles: GMSTBVA 2,5/..-G
• Pitch: 7.5 mm
• Number of positions: 4
• Mounting type: Wave soldering
• Pin layout: Linear pinning
• Locking: without
• Number of levels: 1
• Number of connections: 4
• Number of potentials: 4
• Nominal voltage: 630 V
• Contact material: Cu alloy
• Surface characteristics: Tin-plated
• Metal surface contact area (top layer): Tin (5 - 7 µm Sn)
• Metal surface contact area (middle layer): Nickel (1.3 - 3 µm Ni)
• Metal surface soldering area (top layer): Tin (3 - 5 µm Sn)
• Metal surface soldering area (middle layer): Nickel (1.3 - 3 µm Ni)
• Insulating material: PA
• Insulating material group: I
• CTI according to IEC 60112: 600
• Flammability rating according to UL 94: V0
• Glow wire flammability index GWFI according to EN 60695-2-12: 850
• Glow wire ignition temperature GWIT according to EN 60695-2-13: 775
• Temperature for the ball pressure test according to EN 60695-10-2: 125 °C
• Length [ l ]: 8.57 mm
• Width [ w ]: 29.95 mm
• Height [ h ]: 15.9 mm
• Height (without solder pin): 12 mm
• Solder pin [P]: 3.9 mm
• Pin dimensions: 1 x 1 mm
• Dimension a: 22.5 mm
• Hole diameter: 1.4 mm
• Type of packaging: packed in cardboard
• Pieces per package: 250
• Denomination packing units: Pcs.
• Note: In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load.
• Ambient temperature (storage/transport): -40 °C ... 70 °C
• Ambient temperature (assembly): -5 °C ... 100 °C
• Ambient temperature (operation): -40 °C ... 100 °C (dependent on the derating curve)
• Clearances and creepage distances: IEC 60664-1:2007-04
• Rated insulation voltage (III/3): 400 V
• Rated insulation voltage (III/2): 630 V
• Rated insulation voltage (II/2): 630 V
• Rated surge voltage (III/3): 6 kV
• Rated surge voltage (III/2): 6 kV
• Rated surge voltage (II/2): 6 kV
• Minimum clearance - inhomogeneous field (III/3): 5.5 mm
• Minimum clearance - inhomogeneous field (III/2): 5.5 mm
• Minimum clearance - inhomogeneous field (II/2): 5.5 mm
• Minimum creepage distance value (III/3): 6.3 mm
• Minimum creepage distance value (III/2): 5.5 mm
• Minimum creepage distance value (II/2): 5.5 mm
• Insertion strength per pos. approx.: 8 N
• Withdraw strength per pos. approx.: 6 N
• Polarization when inserted requirement >20 N: Test passed
• Contact holder in insert requirements >20 N: Test passed
• Contact resistance R1: 3.7 mΩ
• Insertion/withdrawal cycles: 25
• Contact resistance R2: 3.8 mΩ
• Impulse withstand voltage at sea level: 7.3 kV
• Power-frequency withstand voltage: 3.31 kV
• Insulation resistance, neighboring positions: > 75 TΩ
• Cold stress: -40 °C/2 h
• Thermal stress: 100 °C/168 h
• Corrosive stress: 0.2 dm3SO2on 300 dm3/40 °C/1 cycle
• Vibration test: Test passed
• Frequency: 10 - 150 - 10 Hz
• Sweep speed: 1 octave/min
• Amplitude: 0.35 mm (10 - 60.1 Hz)
• Acceleration: 5 g (60.1 - 150 Hz)
• Test duration per axis: 2.5 h