Phoenix Contact 3010217 High-Current Terminal Block

Phoenix Contact 3010217 High-Current Terminal Block Specifications:

• Number of levels: 1
• Number of connections: 2
• Potentials: 1
• Nominal cross section: 240 mm²
• Color: gray
• Insulating material: PA
• Flammability rating according to UL 94: V0
• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 13.78 W
• Maximum load current: 415 A
• Nominal current IN: 415 A
• Nominal voltage UN: 1000 V
• Open side panel: No
• Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection: guaranteed
• Finger protection: guaranteed
• Note regarding shock protection: Finger-safe protection is not guaranteed if bridges are positioned.
• Result of surge voltage test: Test passed
• Surge voltage test setpoint: 9.8 kV
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 2.2 kV
• Result of the test for mechanical stability of terminal points: Test passed
• Result of bending test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Bending test conductor cross section/weight: 70 mm²/10.4 kg, 240 mm²/20.0 kg
• Tensile test result: Test passed
• Conductor cross section tensile test: 70 mm²
• Tractive force setpoint: 285 N
• Conductor cross section tensile test (240 mm²): 578 N
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 32/NS 35
• Setpoint: 20 N
• Result of voltage-drop test: Test passed
• Requirements, voltage drop: ≤ 3.2 mV
• Result of temperature-rise test: Test passed
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing: 240 mm²
• Short-time current: 28.8 kA
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s
• Relative insulation material temperature index (Elec., UL 746 B): 130 °C
• Temperature index of insulation material (DIN EN 60216-1): 130 °C
• Static insulating material application in cold: -60 °C
• Behavior in fire for rail vehicles (DIN 5510-2): Test passed
• Flame test method (DIN EN 60695-11-10): V0
• Oxygen index (DIN EN ISO 4589-2): >32 %
• NF F16-101, NF F10-102 Class I: 2
• NF F16-101, NF F10-102 Class F: 2
• Surface flammability NFPA 130 (ASTM E 162): passed
• Specific optical density of smoke NFPA 130 (ASTM E 662): passed
• Smoke gas toxicity NFPA 130 (SMP 800C): passed
• Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
• Width: 36 mm
• Length: 100 mm
• Height: 123.6 mm
• Height NS 35/15: 131.5 mm
• Height NS 32: 129 mm
• Note: Screws with hexagonal socket
• Connection method: Screw connection
• Connection in acc. with standard: IEC 60947-7-1
• Conductor cross section solid min.: 70 mm²
• Conductor cross section solid max.: 240 mm²
• Conductor cross section AWG min.: 2/0
• Conductor cross section AWG max.: 500
• Conductor cross section flexible min.: 70 mm²
• Conductor cross section flexible max.: 185 mm²
• Stripping length: 40 mm
• Internal cylindrical gage: B15
• Screw thread: M10
• Tightening torque, min: 25 Nm
• Tightening torque max: 30 Nm