WEIDMULLER 0380520000 SAK 6/35 KRG Terminal Block

WEIDMULLER 0380520000 SAK 6/35 KRG Terminal Block Specifications:

• Deliverystatus: This article will no longer be available in the future.
• Available until: 2020-12-31
• Type: SAK 6/35 KRG
• Order No.: 0380520000
• Version: Screw connection, for screwable cross-connection, One end without connector
• GTIN(EAN): 4008190007300
• Qty.: 100pc(s)
• Alternative product: 1020300000
• Width: 8 mm
• Height: 45 mm
• Depth: 44 mm
• Net weight: 16.39 g
• Width(inches): 0.315 inch
• Height(inches): 1.772 inch
• Depth(inches): 1.732 inch
• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 130 °C
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: medium yellow
• Certificate No.(ATEX): KEMA97ATEX1798U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 6 mm²
• Current(IECEX): 36 A
• Ex 2014/34/EU label: II 2 G D
• Certificate No.(IECEX): IECEXKEM06.0014U
• Current(ATEX): 36 A
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 6 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 35
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: Yes
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: right
• Certificate No.(CSA): 154685-1501714
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 20 AWG
• Current size C(CSA): 47 A
• Wire cross section max.(CSA): 8 AWG
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11
• Blade size: 4.0 x 0.8 mm
• Clampingrange,min.: 0.33 mm²
• Connection cross-section, stranded, max.: 6 mm²
• Connection direction: on side
• Number of connections: 2
• Tighteningtorque,max.: 1.6 Nm
• Torque level with DMS electric screwdriver: 3
• Twin wire-end ferrules,min.: 0.5 mm²
• Wire connection cross section AWG, min.: AWG 22
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: 6 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 6 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• Clampingrange,max.: 10 mm²
• Clampingscrew: M 3.5
• Connection cross-section, stranded, min.: 0.5 mm²
• Gauge to IEC 60947-1: A5
• Strippinglength: 12 mm
• Tighteningtorque,min.: 0.8 Nm
• Twin wire-end ferrules, max.: 4 mm²
• Type of connection: Screw connection
• Wire connection cross-section, finely stranded, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 10 mm²
• Rated cross-section: 6 mm²
• Rated current: 41 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.31 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 57 A
• Volume resistance according to IEC 60947-7-x: 0.78 mΩ
• Rated impulse withstand voltage: 8 kV
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 22 AWG
• Conductor size Field wiringmin.(UR): 22 AWG
• Voltage size C (UR): 600 V
• Conductor size Factorywiringmax.(UR): 8 AWG
• Conductor size Field wiringmax.(UR): 8 AWG
• Current size C(UR): 40 A
• ROHS: Conform