WEIDMULLER 1017000000 Test-Disconnect Terminal Block

WEIDMULLER 1017000000 Test-Disconnect Terminal Block Specifications:

• Type: WTL 6/1/STB/32
• Order No.: 1017000000
• Version: Screw connection, Spacer, With sockets, One end without connector
• GTIN(EAN): 4008190169039
• Qty.: 50 pc(s).
• Width: 7.9 mm
• Height: 65 mm
• Depth: 47.5 mm
• Depth including DIN rail: 48.5 mm
• Width(inches): 0.311 inch
• Height(inches): 2.559 inch
• Depth(inches): 1.87 inch
• Net weight: 24.46 g
• Storage temperature,max.: 40 °C
• Storage temperature: 10 °C...40 °C
• Continuous operating temp., max.: 120 °C
• Storage temperature,min.: 10 °C
• Continuous operating temp.,min.: -50 °C
• REACH SVHC: Lead 7439-92-1
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: dark beige
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 32
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1057876
• Voltage size C(CSA): 300 V
• Wire cross section min. (CSA): 20 AWG
• Current size C(CSA): 45 A
• Wire cross section max.(CSA): 8 AWG
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 20 AWG
• Conductor size Field wiringmin.(UR): 20 AWG
• Voltage size C (UR): 300 V
• Conductor size Factorywiringmax.(UR): 8 AWG
• Conductor size Field wiringmax.(UR): 8 AWG
• Current size C(UR): 45 A
• Blade size: 0.8 x 4.0 mm
• Clampingrange,min.: 0.5 mm²
• Connection cross-section, stranded, max.: 10 mm²
• Connection direction: on side
• Number of connections: 2
• Tighteningtorque,max.: 1.6 Nm
• Torque level with DMS electric screwdriver: 3
• Wire connection cross section AWG, max.: AWG 8
• Wire connection cross-section, finely stranded, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 10 mm²
• Clampingrange,max.: 10 mm²
• Clampingscrew: M 3.5
• Connection cross-section, stranded, min.: 1.5 mm²
• Gauge to IEC 60947-1: A5
• Strippinglength: 12 mm
• Tighteningtorque,min.: 1 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 20
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 6 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 6 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• Cross-disconnect: without
• Slitting: sliding
• Torque min. screw separator: 0.5 Nm
• Integral test socket: Yes
• Torque max. screw separator: 0.7 Nm
• Rated cross-section: 6 mm²
• Rated current: 41 A
• Volume resistance according to IEC 60947-7-x: 0.78 mΩ
• Rated impulse withstand voltage: 6 kV
• Rated voltage: 630 V
• Current at maximum wires: 57 A
• Power loss in accordance with IEC 60947-7-x: 1.31 W
• Pollution severity: 3
• ETIM 6.0: EC000902
• eClass 9.0: 27-14-11-26
• eClass 10.0: 27-14-11-26
• ETIM 7.0: EC000902
• eClass 9.1: 27-14-11-26
• UNSPSC: 30-21-18-11