WEIDMULLER 8921060000 Relay Module with Contacts

WEIDMULLER 8921060000 Relay Module with Contacts Specifications:

• Type: RCMKIT-I 230VAC 4CO LD
• Order No.: 8921060000
• Version: RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact with test button
• Rated control voltage: 230 V AC
• Continuous current: 6 A
• Connection type: Screw connection
• GTIN(EAN): 4032248692293
• Quantity: 10pc(s)
• Relevant relay: 1181100000
• Relevant rim module: 8869650000
• Relevant base: 8869420000
• Width: 27.2 mm
• Height: 77 mm
• Depth: 78.3 mm
• Net weight: 106.5 g
• Width(inches): 1.071 inch
• Height(inches): 3.031 inch
• Depth(inches): 3.083 inch
• Humidity: 40 °C / 93 % rel. humidity, no condensation
• Operating temperature, min: -40 °C
• Storage temperature, min: -40 °C
• Storage temperature: -40 °C...70 °C
• Operating temperature, max: 70 °C
• Storage temperature, max: 70 °C
• REACH SVHC: Lead 7439-92-1
• Power rating: 1.0 VA
• Coil resistance: 19465 Ω ± 15 %
• Rated current AC: 4.3 mA
• Pull-in/drop-out voltage, typ.: 184 V/69 V AC
• Status indicator: red LED
• Rated switching voltage: 240 V AC
• AC switching capacity (resistive), max.: 1500 VA
• Switch-on delay: ≤ 15 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
• Max. switching voltage, AC: 240 V
• Inrush current: 12 A/20 ms
• DC switching capacity (resistive), max.: 144 W @ 24 V
• Switch-off delay: ≤ 10 ms
• Max. switching frequency at rated load: 0.1 Hz
• Contact type: 4 CO contact with test button (AgNi 90/10)
• Mechanical service life: AC coil 20 x 106 switching cycles, DC coil 30 x 106 switching cycles
• Rail: TS 35
• Mechanical switch position indicator: Yes
• Colour: black
• Rated voltage: 250 V
• Pollution severity: 2
• Protection degree: IP20
• Creepage and clearance distance input – output: ≥ 4 mm
• Dielectric strength of open contact: 1.2 kVeff/1 min.
• Surge voltage category: III
• Insulating material group: IIIa
• Dielectric strength, Input/Output: 2.5 kVeff/ 1 Min.
• Dielectric strength of neighbouring contacts: 2 kVeff/ 1 min
• Impulse withstand voltage: 5 kV (1.2/50 µs)
• Wire connection method: Screw connection
• Tightening torque, min: 0.5 Nm
• Clamping range, rated connection: 2.5 mm²
• Clamping range, max: 2.5 mm²
• Wire cross-section, solid, max: 2.5 mm²
• Wire connection cross section, finely stranded, max: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max: 2.5 mm²
• Wire connection cross section, finely stranded, two clampable wires, max: 1.5 mm²
• Stripping length, rated connection: 8 mm
• Tightening torque, max: 0.7 Nm
• Clamping range, min: 1 mm²
• Wire cross-section, solid, min: 1 mm²
• Wire connection cross-section, finely stranded, min: 1 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min: 1 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min: 1 mm²
• Wire connection cross section, finely stranded, two clampable wires, min: 1 mm²
• Blade size: size PZ1
• ETIM 6.0: EC001437
• eClass 9.0: 27-37-16-01
• eClass 10.0: 27-37-16-01
• ETIM 7.0: EC001437
• eClass 9.1: 27-37-16-01
• UNSPSC: 30-21-19-17