WEIDMULLER 1122780000 TRS 24VUC 1CO Relay Module

WEIDMULLER 1122780000 TRS 24VUC 1CO Relay Module Specifications:

• Type: TRS 24VUC 1CO
• Order No.: 1122780000
• Version: TERMSERIES, Relay module, Number of contacts: 1, CO contact AgNi, Rated control voltage: 24 V UC ±10 %, Continuous current: 6 A, Screw connection
• GTIN(EAN): 4032248905041
• Quantity: 10 pc(s).
• Width: 6.4 mm
• Height: 89.6 mm
• Depth: 87.8 mm
• Net weight: 34 g
• Width(inches): 0.252 inch
• Height(inches): 3.528 inch
• Depth(inches): 3.457 inch
• Humidity: 5-95% relative humidity, Tu= 40°C, without condensation
• Operating temperature,min: -40 °C
• Storage temperature,min: -40 °C
• Storage temperature: -40 °C...85 °C
• Operating temperature, max: 60 °C
• Storage temperature,max: 85 °C
• REACH SVHC: Lead 7439-92-1
• Ambient temperature(operational),max: 60 °C
• Connection cross-section AWG, max: AWG 14
• Tighteningtorque,max: 0.4 Nm
• Altitude: ≤ 2000 m, above sea level
• Connection cross-section AWG,min: AWG 26
• Type of conductor: rigid copper conductor, flexible copper conductor
• Pollution severity level: 2
• Rated control voltage: 24 V UC ± 10 %
• Rated current DC: 6.4 mA
• Pull-in/drop-out voltage, typ: 16 V / 5 V AC, 20 V/6 V DC
• Status indicator: Green LED
• Coil voltage of the replacement relay: 24 V DC
• Rated current AC: 11.7 mA
• Power rating: 270 mVA/154 mW
• Pull-in/drop-out current, typ: 8.5 mA / 2 mA AC, 5 mA/1 mA DC
• Protective circuit: Rectifier
• Rated switchingvoltage: 250 V AC
• Max. switchingvoltage,DC: 250 V
• Inrush current: 20 A/20 ms
• DC switchingcapacity (resistive),max: 144 W @ 24 V
• Switch-off delay: ≤ 40 ms
• Max. switching frequency at rated load: 0.1 Hz
• Max. switchingvoltage,AC: 250 V
• Continuous current: 6 A
• AC switchingcapacity (resistive),max: 1500 VA
• Switch-on delay: ≤ 6 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
• Contact type: 1 CO contact (AgNi)
• Mechanical service life: 5 x 106 switching cycles
• Rail: TS 35
• Mechanical switchposition indicator: No
• UL 94 flammability rating: V-0
• Colour: black
• Standards: EN 50178, EN 55011, EN 61000-6-1,2,4
• Certificate no. (cULus): E141197
• Certificate No. (DNVGL): TAA00001E5
• Wire connection method: Screw connection
• Clampingrange,min: 0.14 mm²
• Blade size: size PH0
• Clampingrange,rated connection: 1.5 mm²
• Clampingrange,max: 2.5 mm²
• Wire connection cross section AWG,max: AWG 14
• Wire cross-section,solid,max: 2.5 mm²
• Wire connection cross section, finely stranded,max: 2.5 mm²
• Wire cross-section, finely stranded, max (AWG): AWG 14
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),max: 2.5 mm²
• Wire cross-section, finely stranded, two clampable wires,max: 1 mm²
• Twin wire-end ferrules,max: 1 mm²
• Gauge to IEC 60947-1: A1, B1
• ETIM 6.0: EC001437
• ETIM 7.0: EC001437
• eClass 9.0: 27-37-16-01
• eClass 9.1: 27-37-16-01
• eClass 10.0: 27-37-16-01