WEIDMULLER 1683420000 Terminal Block Feed-through

WEIDMULLER 1683420000 Terminal Block Feed-through Specifications:

• Type: Feed-through terminal
• Order No.: 1683420000
• Version: Tension clamp connection
• GTIN(EAN): 4008190478179
• Quantity: 100 pc(s).
• Width: 5.1 mm
• Height: 79.5 mm
• Depth: 38.5 mm
• Depth including DIN rail: 39.5 mm
• Width(inches): 0.201 inch
• Height(inches): 3.13 inch
• Depth(inches): 1.516 inch
• Net weight: 11.54 g
• Continuous operating temp., min.: -50 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: Red
• Certificate No.(ATEX): KEMA97ATEX2521U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 2.5 mm²
• Current(IECEX): 20 A
• Voltage, cross-connection: CrossConnectionGuide.pdf
• Marking EN 60079-7: Ex e II
• Certificate No.(IECEX): IECEXULD05.0009U
• Current(ATEX): 21 A
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Ex 2014/34/EU label: II 2 G D
• Version (System specifications): Tension-clamp connection, for plug-in cross-connector, One end without connector
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• End cover plate required: Yes
• No. of clamping points per level: 4
• Levels cross-connected internally: No
• Mounting rail: TS 35
• Explosion-tested version: Yes
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Busbar
• Open sides: right
• Certificate No.(CSA): 200039-1152892
• Current size C(CSA): 27 A
• Voltage size B(CSA): 600 V
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 26 AWG
• Current size B(CSA): 27 A
• Current size D(CSA): 5 A
• Voltage size C(CSA): 600 V
• Wire cross section max.(CSA): 12 AWG
• Blade size: 0.6 x 3.5 mm
• Clampingrange,rated connection,min.: 0.05 mm²
• Cross-section for connected conductor: 0.5 mm²
• Number of connections: 4
• Type of connection: Tension clampconnection
• Wire connection cross section AWG, min.: AWG 30
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min.: 0.5 mm²
• Wire connection cross section, solid core max. rated connection: 4 mm²
• Wire connection cross-section, finely stranded, max.: 2.5 mm²
• Clampingrange,rated connection,max.: 4 mm²
• Connection direction: top
• Gauge to IEC 60947-1: A3
• Strippinglength: 10 mm
• Wire connection cross section AWG, max.: AWG 12
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max.: 2.5 mm²
• Wire connection cross section, finely stranded, max.: 4 mm²
• Wire connection cross section, solid core, min. rated connection: 0.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Rated impulse withstand voltage: 8 kV
• Rated voltage: 800 V
• Current at maximum wires: 27 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Pollution severity: 3
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 30 AWG
• Conductor size Field wiringmin.(UR): 30 AWG
• Voltage size C (UR): 600 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• Current size C(UR): 25 A
• ETIM 3.0: EC000897
• ETIM 5.0: EC000897
• UNSPSC: 30-21-18-11
• eClass 6.2: 27-14-11-20
• eClass 8.1: 27-14-11-20
• eClass 9.1: 27-14-11-20
• ETIM 4.0: EC000897
• ETIM 6.0: EC000897
• eClass 5.1: 27-14-11-20
• eClass 7.1: 27-14-11-20
• eClass 9.0: 27-14-11-20