WEIDMULLER 1706050000 Tension Clamp Terminal Block

WEIDMULLER 1706050000 Tension Clamp Terminal Block Specifications:

• Type: ZDU 2.5-2/3AN OR
• Order No.: 1706050000
• Version: Feed-through terminal, Tension-clamp connection
• GTIN(EAN): 4008190915384
• Quantity: 100 pc(s).
• Width: 5.1 mm
• Height: 50.5 mm
• Depth: 43 mm
• Depth including DIN rail: 44 mm
• Width(inches): 0.201 inch
• Height(inches): 1.988 inch
• Depth(inches): 1.693 inch
• Net weight: 6.63 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature, min.: -25 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 55 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: orange
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 4 mm²
• Current(IECEX): 21 A
• Certificate No.(IECEX): IECEXULD16.0036U
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 4 mm²
• Ex 2014/34/EU label: II 2 G D
• Marking EN 60079-7: Ex eb II C Gb
• Version (System specifications): Tension-clamp connection, for plug-in cross-connector, One end without connector
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• End cover plate required: Yes
• Number of clamping points per level: 3
• Levels cross-connected internally: No
• Rail: TS 35
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1194786
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 26 AWG
• Current size C(CSA): 23 A
• Wire cross section max.(CSA): 14 AWG
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 24 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 8 kV
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 26 AWG
• Conductor size Field wiringmin.(UR): 26 AWG
• Voltage size C (UR): 600 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• Current size C(UR): 20 A
• Blade size: 0.6 x 3.5 mm
• Clamping range, min.: 0.13 mm²
• Gauge to IEC 60947-1: A2
• Stripping length: 10 mm
• Wire connection cross section AWG, max.: AWG 12
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 2.5 mm²
• Clamping range, max.: 2.5 mm²
• Connection direction: Inclined/angled
• Number of connections: 3
• Type of connection: Tension-clamp connection
• Wire connection cross section AWG, min.: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 1.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²