WEIDMULLER 1720950000 ZPEA 2.5-2 Terminal

WEIDMULLER 1720950000 ZPEA 2.5-2 Terminal Specifications:

• Type: ZPEA 2.5-2
• Version: Tension-clamp connection, With PE connection, One end without connector
• Order No.: 1720950000
• GTIN(EAN): 4008190376819
• Qty.: 100 pc(s).
• Width: 5.1 mm
• Height: 35 mm
• Depth: 30 mm
• Depth including DIN rail: 30.5 mm
• Width(inches): 0.201 inch
• Height(inches): 1.378 inch
• Depth(inches): 1.181 inch
• Net weight: 4.68 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: -25 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 55 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: Green/yellow
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Wire cross section max.(ATEX): 4 mm²
• Ex 2014/34/EU label: II 2 G D
• Certificate No.(IECEX): IECEXULD16.0036U
• Wire cross section max.(IECEX): 4 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 15
• PE function: Yes
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1152892
• Wire cross section min. (CSA): 26 AWG
• Wire cross section max.(CSA): 12 AWG
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.13 mm²
• Gauge to IEC 60947-1: A2
• Strippinglength: 10 mm
• Wire connection cross section AWG,max.: AWG 12
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 4 mm²
• Clampingrange,max.: 4 mm²
• Connection direction: on side
• Number of connections: 2
• Type of connection: Tension-clampconnection
• Wire connection cross section AWG,min.: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 1.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• TS 15 offset: 17.5 mm
• TS 35 offset: 34.5 mm
• TS 32 offset: 34.5 mm
• Rated short-time current: 300 A (2.5 mm²)
• Rated cross-section: 2.5 mm²
• Standards: IEC 60947-7-2
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Rated impulse withstand voltage to adjacent terminal: 6 kV
• Rated voltage to adjoiningterminal: 500 V
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 6 kV
• Pollution severity: 3
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 26 AWG
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiring min. (UR): 26 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• ETIM 6.0: EC000901
• eClass 9.0: 27-14-11-41
• eClass 10.0: 27-14-11-41
• ETIM 7.0: EC000901
• eClass 9.1: 27-14-11-41
• UNSPSC: 30-21-18-11