WEIDMULLER 1783820000 DLI 2.5 DB Terminal Block

WEIDMULLER 1783820000 DLI 2.5 DB Terminal Block Specifications:

• Width: 6.1 mm
• Height: 66 mm
• Depth: 48.5 mm
• Depth including DIN rail: 49 mm
• Width(inches): 0.24 inch
• Height(inches): 2.598 inch
• Depth(inches): 1.909 inch
• Net weight: 9.52 g
• Storage temperature,max.: 55 °C
• Storage temperature: -25 °C...55 °C
• Continuous operating temp., max.: 120 °C
• Storage temperature,min.: -25 °C
• Continuous operatingtemp.,min.: -50 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: dark beige
• Version: Screw connection, One end without connector
• Number of potentials: 3
• Number of clamping points per level: 1
• Levels cross-connected internally: No
• Rail: TS 35
• PE function: No
• End cover plate required: Yes
• Number of levels: 3
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 12400-134
• Voltage size C(CSA): 300 V
• Wire cross section min. (CSA): 26 AWG
• Current size C(CSA): 10 A
• Wire cross section max.(CSA): 12 AWG
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 2.5 mm²
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.13 mm²
• Connection cross-section, stranded, max.: 4 mm²
• Connection direction: on side
• Number of connections: 4
• Tighteningtorque,max.: 0.6 Nm
• Torque level with DMS electric screwdriver: 1
• Wire connection cross section AWG, max.: AWG 12
• Wire connection cross-section, finely stranded, max.: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 4 mm²
• Clampingrange,max.: 4 mm²
• Clampingscrew: M 2.5
• Connection cross-section, stranded, min.: 1.5 mm²
• Gauge to IEC 60947-1: A3
• Strippinglength: 7 mm
• Tighteningtorque,min.: 0.4 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 2.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Rated voltage: 250 V
• Current at maximum wires: 32 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 4 kV
• Surge voltage category: III
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 26 AWG
• Conductor size Field wiringmin.(UR): 22 AWG
• Voltage size D (UR): 300 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• Current size D(UR): 10 A
• ETIM 6.0: EC000900
• eClass 9.0: 27-14-11-28
• eClass 10.0: 27-14-11-28
• ETIM 7.0: EC000900
• eClass 9.1: 27-14-11-28
• UNSPSC: 30-21-18-11