WEIDMULLER 8390590000 MCZ R 24VUC Relay Module

WEIDMULLER 8390590000 MCZ R 24VUC Relay Module Specifications:

• Width: 6.1 mm
• Height: 91 mm
• Depth: 63.2 mm
• Net weight: 27.2 g
• Width(inches): 0.24 inch
• Height(inches): 3.583 inch
• Depth(inches): 2.488 inch
• Humidity: 5 - 93% rel. humidity
• Operating temperature,min: -25 °C
• Storage temperature,min: -40 °C
• Storage temperature: -40 °C...60 °C
• Operating temperature, max: 50 °C
• Storage temperature,max: 60 °C
• Operatingtemperature: -25 °C...50 °C
• REACH SVHC: Lead 7439-92-1
• Certificate No. (cURus): E141197
• Rated control voltage: 24 V UC ± 10 %
• Rated current DC: 6.4 mA
• Pull-in/drop-out voltage, typ.: 19.5 V / 3 V AC, 19.5 V/3 V DC
• Protective circuit: Rectifier
• Rated current AC: 11 mA
• Power rating: 160 mVA/150 mW
• Status indicator: Green LED
• Rated switchingvoltage: 250 V AC
• Max. switchingvoltage,DC: 250 V
• Inrush current: 6 A
• DC switchingcapacity (resistive),max: 144 W @ 24 V
• Switch-off delay: < 35 ms
• Max. switching frequency at rated load: 0.1 Hz
• Max. switchingvoltage,AC: 250 V
• Continuous current: 6 A
• AC switchingcapacity (resistive),max: 1500 VA
• Switch-on delay: < 6 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V
• Contact type: 1 CO contact (AgSnO)
• Mechanical service life: 10 x 10^6 switching cycles
• Rail: TS 35
• Mechanical switchposition indicator: No
• Colour: beige
• Test button: No
• Open sides: right
• UL 94 flammability rating: V-0
• Rated voltage: 300 V
• Pollution severity: 2
• Dielectric strength, Input/Output: 4 kVeff/ 1 s
• Dielectric strength to mounting rail: 4 kVeff/ 1 Min.
• Surge voltage category: III
• Protection degree: IP20
• Creepage and clearance distance input – output: ≥ 5.5 mm
• Impulse withstand voltage: 4 kV (1.2/50 µs)
• Standards: DIN EN 50178, UL508
• Certificate No. (DNVGL): TAE00003BK
• Certificate No. (CSA): 154685-1198742
• Certificate No. (GERMLLOYD): TAE00003BK
• Wire connection method: Tension-clampconnection
• Clampingrange,rated connection: 1.5 mm²
• Clamping range, max: 1.5 mm²
• Wire cross-section AWG,max: AWG 16
• Wire cross-section, solid, max: 1.5 mm²
• Wire cross-section, finely stranded,max: 1.5 mm²
• Wire cross-section, finely stranded, max (AWG): AWG 16
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max: 1.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max: 1.5 mm²
• Strippinglength,rated connection: 8 mm
• Clampingrange,min: 0.5 mm²
• Wire connection cross section AWG,min: AWG 26
• Wire cross-section, solid, min: 0.5 mm²
• Wire cross-section, finely stranded,min: 0.5 mm²
• Wire cross-section, finely stranded, min (AWG): AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min: 0.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min: 0.5 mm²
• Blade size: 0.6 x 3.5 mm
• ETIM 6.0: EC001437
• eClass 9.0: 27-37-16-01
• eClass 10.0: 27-37-16-01
• ETIM 7.0: EC001437
• eClass 9.1: 27-37-16-01
• UNSPSC: 30-21-19-17