WEIDMULLER 8897100000 Relay Module

WEIDMULLER 8897100000 Relay Module Specifications:

• Type: RCIKIT 115VAC 2CO LD
• Order No.: 8897100000
• Version: RIDERSERIES RCI, Relay module, No. of contacts: 2 CO contact AgNi 90/10
• Rated control voltage: 115 V AC
• Continuous current: 8 A
• Connection: Screw connection
• GTIN (EAN): 4032248646876
• Quantity: 10 pc(s).
• Width: 15.8 mm
• Height: 77 mm
• Depth: 70.2 mm
• Net weight: 63.4 g
• Width (inches): 0.622 inch
• Height (inches): 3.031 inch
• Depth (inches): 2.764 inch
• Humidity: 40 °C / 93 % rel. humidity, no condensation
• Storage temperature: -40 °C...70 °C
• Operating temperature: -40 °C...70 °C
• Power rating: 0.8 VA
• Coil resistance: 8100 Ω ± 15 %
• Rated current AC: 7 mA
• Pull-in/drop-out voltage: 86.3 V/17.3 V AC
• Status indicator: red LED
• Rated switchingvoltage: 250 V AC
• Max. switchingvoltage,AC: 400 V
• AC switchingcapacity (resistive): 2000 VA
• Switch-on delay: ≤ 10 ms
• Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
• Inrush current: 15 A/4 s
• DC switchingcapacity (resistive): 192 W @ 24 V
• Switch-off delay: ≤ 6 ms
• Max. switching frequency at rated load: 0.1 Hz
• Contact type: 2 CO contact (AgNi 90/10)
• Mechanical service life: AC coil 5 x 106 Switch. cycles, DC coil 10 x 106 Switch. cycles
• UL 94 flammability rating: V-2
• Rated voltage: 250 V
• Dielectric strength input – output: 5 kVeff/ 1min
• Dielectric strength of open contact: 1 kVeff/ 1 min
• Protection degree: IP20
• Pollution severity: 2
• Creepage and clearance distance input – output: ≥ 8 mm
• Dielectric strength of neighbouring contacts: 2.5 KVeff/ 1 min
• Impulse withstand voltage: 5 kV(1.2/50µs)
• Insulatingmaterialgroup: IIIa
• Surge voltage category: III
• Standards: DIN EN 50178
• Certificate no.(CSA)base: 249409-2295474
• Certificate no. (cURus) base: E223759
• Certificate no.(CSA)relay: 249409-2426937
• Certificate no.(cURus)relay: E224238
• Tightening torque,min.: 0.5 Nm
• Clamping range,rated connection: 2.5 mm²
• Clamping range,rated connection,max.: 2.5 mm²
• Wire cross-section, solid, max.: 2.5 mm²
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,max.: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),max.: 2.5 mm²
• Wire cross-section, finely stranded, two clampable wires, max.: 1.5 mm²
• Stripping length,rated connection: 8 mm
• Tightening torque,max.: 0.7 Nm
• Clamping range,rated connection,min.: 1 mm²
• Wire cross-section,solid,min.: 1 mm²
• Wire connection cross-section, finely stranded,min.: 1 mm²
• Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,min.: 1 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 1 mm²
• Wire connection cross section, finely stranded,two clampable wires,min.: 1 mm²
• Blade size: size PZ1
• ETIM 3.0: EC001437
• ETIM 5.0: EC001437
• UNSPSC: 30-21-19-17
• eClass 6.2: 27-37-16-01
• eClass 8.1: 27-37-16-01
• eClass 9.1: 27-37-16-01
• ETIM 4.0: EC001437
• ETIM 6.0: EC001437
• eClass 5.1: 27-37-16-01
• eClass 7.1: 27-37-16-01
• eClass 9.0: 27-37-16-01