WEIDMULLER 8937920000 MOS Solid State Relay

WEIDMULLER 8937920000 MOS Solid State Relay Specifications:

• Type: MOS 5VTTL/24VDC 0,1A
• Order No.: 8937920000
• Version: MICROOPTO, solid-state relais, 1 NO contact (Bipolar transistor)
• Rated control voltage: 5 V
• Rated switching voltage: 24 VDC ±20%
• Continuous current: 100 mA
• GTIN(EAN): 4032248716159
• Quantity: 1 pc(s).
• Width: 6.1 mm
• Height: 88.1 mm
• Depth: 97.8 mm
• Net weight: 34.8 g
• Width(inches): 0.24 inch
• Height(inches): 3.468 inch
• Depth(inches): 3.85 inch
• Humidity: 5 - 93% rel. humidity, Tu = 40°C, no condensation
• Operating temperature, min.: -25 °C
• Storage temperature, min.: -40 °C
• Storage temperature: -40 °C...60 °C
• Operating temperature, max.: 60 °C
• Storage temperature, max.: 60 °C
• Operating temperature: -25 °C...60 °C
• MTTF: 1,686 Years
• REACH SVHC: Lead 7439-92-1
• Power rating: < 0.5 mW
• Status indicator: Green LED
• Nominal auxiliary voltage: 5 V DC ± 5 % / HIGH: max. 9 mA, LOW: max 400 µA
• Nominal control current: < 100µA
• Cut-in/dropout voltage: 2 V/1 V DC
• Protective circuit: Varistor, Reverse polarity protection
• Rated switchingvoltage: 24 VDC ±20%
• Load category: LC A
• Switch-off delay: < 1µs
• Leakage current: < 20µA
• Protective circuit, load side: Free-wheelingdiode
• max. switching frequency (DC control voltage): 100 kHz
• Voltage drop at max. load: < 1 V
• Short-circuit-proof: No
• Contact type: 1 NO contact (Bipolar transistor)
• Rail: TS 35
• UL 94 flammability rating: V-0
• Colour: black
• Rated voltage: 300 V
• Surge voltage category: III
• Dielectric strength for control side - load side: 3 KVeff/ 1 Min.
• Impulse withstand voltage: 4 kV (1.2/50 µs)
• Pollution severity: 2
• Clearance and creepage distances for control side - load side: > 3 mm
• Dielectric strength to mounting rail: 4 kVeff/ 1 Min.
• Protection degree: IP20
• Standards: DIN EN 50178, GL 2003-Vl-Abs. 9, IEC 62314, UL508
• Certificate No. (GERMLLOYD): 54853-08
• Certificate No. (DNVGL): TAE000033E
• Certificate no. (cULus): E141197
• Wire connection method: Screw connection
• Tightening torque, min.: 0.4 Nm
• Clamping range, rated connection: 2.5 mm²
• Clamping range, max.: 4 mm²
• Wire cross-section, solid, max.: 4 mm²
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 1.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 1.5 mm²
• Stripping length, rated connection: 7 mm
• Tightening torque, max.: 0.6 Nm
• Clamping range, min.: 0.5 mm²
• Wire cross-section, solid, min.: 0.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 0.5 mm²
• Blade size: 0.6 x 3.5 mm