WEIDMULLER 1746760000 Feed-through Tension Clamp Terminal

WEIDMULLER 1746760000 Feed-through Tension Clamp Terminal Specifications:

• Type: Feed-through terminal, Tension-clamp connection
• Order No.: 1746760000
• Version: Feed-through terminal, Tension-clamp connection
• Rated Voltage: 1000 V
• Rated Current: 57 A
• Width: 10 mm
• Height: 73.5 mm
• Depth: 49.5 mm
• Depth including DIN rail: 50.5 mm
• Width (inches): 0.394 inch
• Height (inches): 2.894 inch
• Depth (inches): 1.949 inch
• Net weight: 25.3 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature, min.: -25 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 55 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: blue
• Certificate No. (ATEX): KEMA99ATEX5514U
• Max. voltage (ATEX): 550 V
• Wire cross section max. (ATEX): 10 mm²
• Current (IECEX): 51 A
• Certificate No. (IECEX): IECEXULD15.0008U
• Current (ATEX): 50 A
• Max. voltage (IECEX): 690 V
• Wire cross section max. (IECEX): 16 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Version (System specifications): Tension-clamp connection, for plug-in cross-connector, One end without connector
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• End cover plate required: Yes
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 35
• Explosion-tested version: Yes
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: right
• Certificate No. (CSA): 200039-1152892
• Current size C (CSA): 55 A
• Voltage size B (CSA): 600 V
• Voltage size D (CSA): 600 V
• Wire cross section min. (CSA): 16 AWG
• Current size B (CSA): 55 A
• Current size D (CSA): 5 A
• Voltage size C (CSA): 600 V
• Wire cross section max. (CSA): 6 AWG
• Blade size: 1.0 x 5.5 mm
• Clamping range, min.: 1.31 mm²
• Connection cross-section, stranded, min.: 1.5 mm²
• Gauge to IEC 60947-1: A6
• Stripping length: 18 mm
• Wire connection cross section AWG, max.: AWG 6
• Wire connection cross-section, finely stranded, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 1.5 mm²
• Wire connection cross-section, solid core, max.: 16 mm²
• Clamping range, max.: 16 mm²
• Connection cross-section, stranded, max.: 16 mm²
• Connection direction: top
• Number of connections: 2
• Type of connection: Tension-clamp connection
• Wire connection cross section AWG, min.: AWG 16
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 10 mm²
• Wire connection cross-section, finely stranded, min.: 1.5 mm²
• Wire connection cross-section, solid core, min.: 1.5 mm²
• TS 35 offset: 39 mm
• Rated cross-section: 10 mm²
• Rated current: 57 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3
• Rated impulse withstand voltage: 8 kV