A Premier B2B Part Search
CARLO GAVAZZI RJ1P23MBT50EBC Solid State Relay Modbus
The CARLO GAVAZZI RJ1P23MBT50EBC is a solid-state relay designed for industrial applications requiring Modbus RTU communication. This relay provides a fieldbus communication interface, allowing for quick modification and reading of parameters. It supports multiple operating modes, including ON/OFF, phase angle, distributed full cycle, and burst firing, with operational ratings up to 50 AACrms and 600 VAC. Features include temperature monitoring with over-temperature protection, opto isolation, LED status indication, and daisy chaining capabilities. It is ideal for applications needing remote control and monitoring of electrical loads.
CARLO GAVAZZI RJ1P23MBT50EBC Solid State Relay Modbus Specifications:
- switching_mode: Proportional
- rated_operational_voltage: 230VACrms
- control_input: 2-wire Modbus RTU
- rated_operational_current: 50AACrms
- terminal_layout: Contactor
- configuration_options: Basic Controller
- modbus_rtu_interface: RS485
- daisy_chaining: Dual sockets
- operating_modes: ON/OFF, Phase angle, Distributed full cycle, Burst firing
- operational_ratings: Up to 50 AACrms and 600 VAC
- temperature_monitoring: With over-temperature protection
- opto_isolation: > 4000 VACrms
- status_indication: LED
- number_of_poles: 1
- blocking_voltage: 650Vp
- supply_voltage: 24VDC
- rated_operational_current_ac51: 50AACrms
- min_operational_current: 500mAACrms
- rep_overload_current: < 200AACrms
- non_rep_surge_current: 1900Ap
- off_state_leakage_current: < 3 mArms
- i2t_for_fusing: 18000A2s
- max_on_state_voltage_drop: 1.6Vrms
- critical_dvdt_off_state: 1000V/µs
- bus_loading: 1/8 unit load
- data_line_esd_voltage_withstand: 15KV HBM
- parity: Selectable - None, Odd, Even
- data_rate: 9600, 19200, 38400, 57600, 115200 baud
- devices_on_bus: 247
- address_configuration: DIP-SWITCH
- operating_temperature_range: -30 to +70ºC
- storage_temperature_range: -40 to +100ºC
- weight: Approx. 415 g
- housing_material: PBT
- control_terminal_cable_size_min: 1 x 0.5 mm2 (1 x AWG20)
- control_terminal_cable_size_max: 1 x 4.0 mm2 (1 x AWG12) or 2 x 2.5 mm2 (2 x AWG14)
- mounting_torque_max_control_terminal: 1 Nm Posidriv 0 bit
- control_terminal_screw: M3
- power_terminal_cable_size_min: 1 x 4 mm2 (1 x AWG12)
- power_terminal_cable_size_max: 1 x 25 mm2 (1 x AWG3) or 2 x 10 mm2 (2 x AWG6)
- mounting_torque_max_power_terminal: 2.4 Nm Posidriv 2 bit
- power_terminal_screw: M5
- data_connection: Shielded RJ45
- data_indication: Orange LED, flashing
- ssr_fault_detection: Yes
- over_temperature_protection: Yes
- output_power: 0 – 99.6%
- output_power_resolution_mode_0: 1/1
- output_power_resolution_mode_1: 1/256
- output_power_resolution_mode_2: 1/256
- output_power_resolution_mode_3: 1/32 – 1/256 depending on time-base setting
- pollution_degree: 2
- installation_category: III
- approvals: UL, cUL
- ce_marking: Yes
Buy the RJ1P23MBT50EBC CARLO GAVAZZI Solid State Relay | myMectronic
Purchase the CARLO GAVAZZI RJ1P23MBT50EBC Solid State Relay securely and efficiently online.
Buy Now
Frequently Asked Questions
Where can I buy CARLO GAVAZZI RJ1P23MBT50EBC?
You can click on the BUY or RFQ button to purchase RJ1P23MBT50EBC from an authorized CARLO GAVAZZI distributor.
How do I troubleshoot issues or seek technical support for part RJ1P23MBT50EBC?
You can download the RJ1P23MBT50EBC datasheet or visit the CARLO GAVAZZI website for support.
Who is the manufacturer of RJ1P23MBT50EBC?
CARLO GAVAZZI