A Premier B2B Part Search
MEAN WELL MPS20012 Medical Power Supply
The MEAN WELL MPS-200-12 is a highly reliable 200W medical power supply designed for critical medical equipment applications. It boasts a universal AC input range, ensuring compatibility with various power sources. Key features include low leakage current for enhanced patient safety, comprehensive protections against short circuits, overload, overvoltage, and over temperature. The MPS-200-12 is medical safety approved and includes power good/fail signal output and remote ON-OFF control. Its robust design and 3-year warranty ensure long-term performance and peace of mind for medical device manufacturers.
MEAN WELL MPS20012 Medical Power Supply Specifications:
- AC INPUT VOLTAGE: 90~264 VAC, 47~440Hz / 127~3/70VDC
- WORKING TEMP: Whole series can operate from -20~+50 °C. Please refer to the derating curves.
- POWER FACTOR (Typ.): PF>0.95/230VAC, PF>0.98/115VAC at full load
- WORKING HUMIDITY: 20~90% RH non-condensing
- AC INPUT CURRENT (Typ.): Maximum input current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz with 100% output load
- INRUSH CURRENT (Typ.): Less than 25A at 115VAC, less than 40A at 230VAC under cold start conditions
- TEMP. COEFFICIENT: 0.04%/ On all outputs at full load between 0~50 °C
- VIBRATION SAFETY STANDARDS: 2G of acceleration, vibrating frequency adjust from 10Hz ~500HZ within 10-minute cycle. 6 testing cycles (60 minutes) each along X, Y, Z axes.
- SETUP, RISE TIME: 1000ms, 20ms / 230VAC at full load, 3000ms, 20ms / 115VAC at full load
- SAFETY STANDARDS: Medical: ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved. Commercial: Also design refer to UL60950-1, TUV EN60950-1
- WITHSTAND VOLTAGE: 1000VAC between Input and F.G, 4000VAC between input and output, 1500VAC between output and F.G.
- HOLD-UP TIME (Typ.): 16ms /230VAC at full load, 16ms /115VAC at full load
- LEAKAGE CURRENT: Less than 180 A at 264VAC for earth leakage current, Less than 100 A at 264VAC for patient leakage current
- ISOLATION RESISTANCE: >100M Ohms for I/P-O/P, I/P-FG, O/P-FG by using 500VDC test voltage
- EMI COMPLIANCE: EN55011, Class B, EN600022, Class
- DC OUTPUT ADJ. RANGE: Can be adjusted between -5%~+10% rated output voltage by potential meter
- OVERLOAD PROTECTION: Hiccup type protection activated at 120~160% rated load and recovers automatically after fault condition is removed
- OVER VOLTAGE PROTECTION: Provided on output channel 1 only at 115%~135% rated output voltage
- OVER TEMPERATURE PROTECTION: Output will be shut down and recovers automatically after temperature goes down
- POWER GOOD / FAIL SIGNAL: TTL logic high for power good and TTL low for power fail
- MTBF: 262,100 hours min. at full load and 25 °C, calculated per MIL-ADBK-21 /F
- DIMENSION (L*W*H): 171.8x100.2x35.5mm
Buy the MPS-200-12 MEAN WELL Medical Power Supply | myMectronic
Purchase the MEAN WELL MPS-200-12 medical power supply securely and reliably online.
Buy Now
Frequently Asked Questions
Where can I buy MEAN WELL MPS20012?
You can click on the BUY or RFQ button to purchase MPS20012 from an authorized MEAN WELL distributor.
How do I troubleshoot issues or seek technical support for part MPS20012?
You can download the MPS20012 datasheet or visit the MEAN WELL website for support.
Who is the manufacturer of MPS20012?
MEAN WELL