WEIDMULLER 0110020000 SAK 10 KRG Terminal Block

WEIDMULLER 0110020000 SAK 10 KRG Terminal Block Specifications:

• Width: 10 mm
• Height: 40 mm
• Depth: 49 mm
• Net weight: 22.68 g
• Width(inches): 0.394 inch
• Height(inches): 1.575 inch
• Depth(inches): 1.929 inch
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 130 °C
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: mediumyellow
• Certificate No.(ATEX): KEMA97ATEX1798U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 10 mm²
• Current(IECEX): 50 A
• Certificate No.(IECEX): IECEXKEM06.0014U
• Current(ATEX): 50 A
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 10 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Version: Screw connection, for screwable cross-connection, One end without connector
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 32
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 154685-1501714
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 16 AWG
• Current size C(CSA): 65 A
• Wire cross section max.(CSA): 6 AWG
• Rated cross-section: 10 mm²
• Rated current: 57 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 76 A
• Volume resistance according to IEC 60947-7-x: 0.56 mΩ
• Rated impulse withstand voltage: 8 kV
• Blade size: 1.0 x 5.5 mm
• Clamping range,min.: 1.5 mm²
• Connection cross-section, stranded, max.: 16 mm²
• Connection direction: on side
• Number of connections: 2
• Tightening torque,max.: 2.4 Nm
• Twin wire-end ferrules,max.: 6 mm²
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 14
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 10 mm²
• Wire connection cross-section, finely stranded, min.: 1.5 mm²
• Wire connection cross-section, solid core, min.: 1.5 mm²
• Clamping range,max.: 16 mm²
• Gauge to IEC 60947-1: B6
• Stripping length: 12 mm
• Tightening torque,min.: 2 Nm
• Twin wire-end ferrules,min.: 0.75 mm²
• Wire connection cross section AWG, max.: AWG 6
• Wire connection cross-section, finely stranded, max.: 16 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 1.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 1.5 mm²
• Wire connection cross-section, solid core, max.: 10 mm²
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11