WEIDMULLER 0582460000 SAK 35/35/IK Terminal Block

WEIDMULLER 0582460000 SAK 35/35/IK Terminal Block Specifications:

• Type: SAK 35/35/IK
• Order No.: 0582460000
• Version: SAK Series, Feed-through terminal, Rated cross-section: 35 mm², Screw connection, beige
• GTIN(EAN): 4008190090692
• Quantity: 20 pc(s).
• Width: 18 mm
• Height: 58 mm
• Depth: 60 mm
• Weight: 67.95 g
• Width(inches): 0.709 inch
• Height(inches): 2.283 inch
• Depth(inches): 2.362 inch
• Net weight: 54.85 g
• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature, min.: 10 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 100 °C
• Material: PA 66
• UL 94 flammability rating: V-2
• Colour: beige/ yellow
• Certificate No.(ATEX): KEMA97ATEX1798U
• Current(ATEX): 109 A
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 35 mm²
• Ex 2014/34/EU label: II 2 G D
• Marking EN 60079-7: Ex eb II C Gb
• Version (connection): Screw connection, for screwable cross-connection, One end without connector
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 35
• PE function: No
• End cover plate required: Yes
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Clamped
• Certificate No.(CSA): 154685-1501714
• Voltage size C(CSA): 600 V
• Current size C(CSA): 145 A
• Wire cross section min. (CSA): 12 AWG
• Wire cross section max.(CSA): 2 AWG
• Rated cross-section: 35 mm²
• Rated current: 125 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 4 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 150 A
• Volume resistance according to IEC 60947-7-x: 0.26 mΩ
• Rated impulse withstand voltage: 8 kV
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 35 mm²
• Blade size: S4(DIN 6911)
• Clamping range, min.: 2.5 mm²
• Connection cross-section, stranded, max.: 50 mm²
• Connection direction: on side
• Number of connections: 2
• Tightening torque, max.: 6 Nm
• Twin wire-end ferrules, max.: 16 mm²
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 12
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: 35 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 35 mm²
• Wire connection cross-section, finely stranded, min.: 2.5 mm²
• Wire connection cross-section, solid core, min.: 2.5 mm²
• Clamping range, max.: 50 mm²
• Clampingscrew: M 6
• Connection cross-section, stranded, min.: 4 mm²
• Gauge to IEC 60947-1: B8
• Stripping length: 18 mm
• Tightening torque, min.: 3 Nm
• Twin wire-end ferrules, min.: 1.5 mm²
• Wire connection cross section AWG, max.: AWG 2
• Wire connection cross section, finely stranded, max.: 35 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 2.5 mm²
• Wire connection cross-section, solid core, max.: 16 mm²