WEIDMULLER 1023500000 W-Series Terminal Block

WEIDMULLER 1023500000 W-Series Terminal Block Specifications:

• Type: WDK 2.5 2D
• Order No.: 1023500000
• Version: Screw connection, with diode, for screwable cross-connection, One end without connector
• GTIN(EAN): 4008190100865
• Quantity: 25 pc(s).
• Width: 5.1 mm
• Height: 69 mm
• Depth: 62.5 mm
• Depth including DIN rail: 63 mm
• Width(inches): 0.201 inch
• Height(inches): 2.717 inch
• Depth(inches): 2.461 inch
• Net weight: 12.39 g
• Storage temperature,max: 40 °C
• Storage temperature: 10 °C...40 °C
• Continuous operating temp., max: 120 °C
• Storage temperature,min: 10 °C
• Continuous operatingtemp.,min: -50 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: dark beige
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: Yes
• Rail: TS 35
• PE function: No
• End cover plate required: Yes
• Number of levels: 2
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Wire connection cross section, finely stranded,two clampable wires,min: 0.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min: 0.5 mm²
• Wire cross-section, finely stranded, two clampable wires,max: 1.5 mm²
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max: 1.5 mm²
• Explosion-tested version: No
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1494105
• Voltage size C(CSA): 300 V
• Wire cross section min. (CSA): 26 AWG
• Current size C(CSA): 10 A
• Wire cross section max.(CSA): 12 AWG
• Component 1: Diode 1N 4007
• Component current: 1 A
• Component voltage: 1,000 V
• Component type: Diode
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min: 0.05 mm²
• Connection cross-section, stranded,max: 4 mm²
• Connection direction: on side
• Number of connections: 4
• Tighteningtorque,max: 0.6 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG,min: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min: 0.5 mm²
• Wire connection cross-section, finely stranded,min: 0.5 mm²
• Wire connection cross-section, solid core,min: 0.5 mm²
• Clampingrange,max: 4 mm²
• Clampingscrew: M 2.5
• Connection cross-section, stranded, min: 1.5 mm²
• Gauge to IEC 60947-1: A3
• Strippinglength: 10 mm
• Tighteningtorque,min: 0.4 Nm
• Wire connection cross section AWG,max: AWG 12
• Wire connection cross section, finely stranded,max: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max: 2.5 mm²
• Wire connection cross-section, solid core,max: 4 mm²
• TS 35 offset: 35.5 mm
• Rated cross-section: 2.5 mm²
• Rated current: 1 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Rated voltage: 400 V
• Current at maximum wires: 1 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 6 kV
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 22 AWG
• Conductor size Field wiringmin.(UR): 22 AWG
• Current size C(UR): 20 A
• Voltage size C (UR): 300 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• Current size B(UR): 20 A
• Voltage size B(UR): 300 V
• ETIM 6.0: EC000903
• eClass 9.0: 27-14-11-27
• eClass 10.0: 27-14-11-27
• ETIM 7.0: EC000903
• eClass 9.1: 27-14-11-47
• UNSPSC: 30-21-18-11
• Product information: Rated current is 10 A for continuous currentbar only. Diode 1N4007 The allowed continuous operating temperature must be observed