WEIDMULLER 1163050000 WMF 2.5 Fuse Terminal Block

WEIDMULLER 1163050000 WMF 2.5 Fuse Terminal Block Specifications:

• Type: WMF 2.5 FU PE 10-36V SW
• Order No.: 1163050000
• Version: Screw connection, Fuse isolator, With PE connection, for plug-in cross-connector, One end without connector
• GTIN(EAN): 4032248992010
• Quantity: 50 pc(s).
• Width: 5.08 mm
• Height: 88 mm
• Depth: 74 mm
• Depth including DIN rail: 74.5 mm
• Width(inches): 0.2 inch
• Height(inches): 3.465 inch
• Depth(inches): 2.913 inch
• Net weight: 19.9 g
• Storage temperature,max: 55 °C
• Storage temperature: -25 °C...55 °C
• Continuous operating temp., max: 120 °C
• Storage temperature,min: -25 °C
• Continuous operatingtemp.,min: -50 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: black
• Certificate No.(ATEX): DEMKO14ATEX1389U
• Current(ATEX): 6.3 A
• Current(IECEX): 6.3 A
• Marking EN 60079-7: Ex ec II C Gc
• Certificate No.(IECEX): IECEXUL14.0097U
• Wire cross section max.(ATEX): 4 mm²
• Wire cross section max.(IECEX): 4 mm²
• Ex 2014/34/EU label: II 3 G D
• Number of levels: 2
• End cover plate required: Yes
• Rail: TS 35
• Open sides: right
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1057876
• Current size C(CSA): 17 A
• Voltage size B(CSA): 600 V
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 26 AWG
• Current size B(CSA): 17 A
• Current size D(CSA): 5 A
• Voltage size C(CSA): 600 V
• Wire cross section max.(CSA): 12 AWG
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min: 0.5 mm²
• Connection cross-section, stranded, max: 4 mm²
• Connection direction: on side
• Number of connections: 3
• Tighteningtorque,max: 0.6 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max: 2.5 mm²
• Wire connection cross-section, finely stranded, min: 0.5 mm²
• Wire connection cross-section, solid core, min: 0.5 mm²
• Clampingrange,max: 4 mm²
• Clampingscrew: M 3
• Connection cross-section, stranded, min: 1.5 mm²
• Gauge to IEC 60947-1: A3
• Strippinglength: 10 mm
• Tighteningtorque,min: 0.5 Nm
• Wire connection cross section AWG, max: AWG 12
• Wire connection cross-section, finely stranded, max: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min: 0.5 mm²
• Wire connection cross-section, solid core, max: 4 mm²
• Cartridge fuse: G-Si. 5 x 20
• Fuse holder (cartridge holder): Pivoting
• Power loss for overload and short-circuit protection for an individual arrangement: 1.6 W at 6.3 A @ 44°C
• Power loss for short-circuit protection only for an individual arrangement: 4 W at 6.3 A @ 61°C
• Power loss for overload and short-circuit protection for a composite arrangement: 1.6 W at 6.3 A @ 23°C
• Power loss for short-circuit protection onlyfor a composite arrangement: 2.5 W at 6.3 A @ 48°C
• Rated cross-section: 2.5 mm²
• Rated current: 6.3 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 8 kV
• Surge voltage category: III
• Rated voltage: 36 V
• Current at maximum wires: 6.3 A
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Certificate No. (cURus): E60693
• Conductor size Factory wiring min. (cURus): 26 AWG
• Conductor size Field wiring min. (cURus): 26 AWG
• Current size C(cURus): 17 A
• Voltage size B(cURus): 600 V
• Voltage size D(cURus): 600 V
• Conductor size Factory wiring max. (cURus): 12 AWG
• Conductor size Field wiring max. (cURus): 12 AWG
• Current size B(cURus): 17 A
• Current size D(cURus): 5 A
• Voltage size C(cURus): 600 V
• ROHS: Conform