WEIDMULLER 12836 SAK Feed-Through Terminal

WEIDMULLER 12836 SAK Feed-Through Terminal Specifications:

• Type: SAK 2.5/10/35
• Order No.: 0499560000
• Version: SAK Series, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection
• GTIN(EAN): 4008190016210
• Quantity: 10 pc(s).
• Width: 6.1 mm
• Height: 44.5 mm
• Depth: 40 mm
• Net weight: 69.5 g
• Width(inches): 0.24 inch
• Height(inches): 1.752 inch
• Depth(inches): 1.575 inch
• Continuous operating temp., min.: -50 °C
• Continuous operating temp., max.: 100 °C
• Material: PA 66
• UL 94 flammability rating: V-2
• Colour: beige/ yellow
• Certificate No.(ATEX): KEMA97ATEX1798U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 2 mm²
• Current(IECEX): 21 A
• Voltage, cross-connection: CrossConnectionGuide.pdf
• Marking EN 60079-7: Ex e II
• Certificate No.(IECEX): IECEXKEM06.0014U
• Current(ATEX): 21 A
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 2.5 mm²
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• End cover plate required: Yes
• No. of clamping points per level: 2
• Levels cross-connected internally: No
• Mounting rail: TS 35
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 10
• Type of mounting: Snap-on
• Certificate No.(CSA): 12400-129
• Voltage size C(CSA): 300 V
• Wire cross section min. (CSA): 26 AWG
• Current size C(CSA): 25 A
• Wire cross section max.(CSA): 10 AWG
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 4 mm²
• Blade size: 0.6 x 3.5 mm
• Clampingrange,rated connection,min.: 0.13 mm²
• Connection direction: on side
• Gauge to IEC 60947-1: A3
• Strippinglength: 10 mm
• Tightening torque, min.: 0.4 Nm
• Twin wire-end ferrules,max.: 1.5 mm²
• Type of connection: Screw connection
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,max.: 4 mm²
• Wire connection cross section, finely stranded,max.: 4 mm²
• Wire connection cross section, solid core,min. rated connection: 0.5 mm²
• Wire connection cross section, stranded,rated connection, min.: 0.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Clampingrange,rated connection,max.: 6 mm²
• Clampingscrew: M 2.5
• Cross-section for connected conductor,finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,min.: 0.5 mm²
• Number of connections: 2
• Tighteningtorque,max.: 0.6 Nm
• Torque level with DMS electric screwdriver: 1
• Twin wire-end ferrules,min.: 0.5 mm²
• Wire connection cross section AWG,min.: AWG 26
• Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1,rated connection,min.: 0.5 mm²
• Wire connection cross section, solid core max. rated connection: 6 mm²
• Wire connection cross section, stranded,rated connection,max.: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection,max.: 4 mm²
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Rated impulse withstand voltage: 8 kV
• Rated voltage: 800 V
• Current at maximum wires: 41 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Pollution severity: 3
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 22 AWG
• Conductor size Field wiringmin.(UR): 22 AWG
• Voltage size C (UR): 600 V
• Conductor size Factorywiringmax.(UR): 12 AWG
• Conductor size Field wiringmax.(UR): 12 AWG
• Current size C(UR): 20 A
• ETIM 3.0: EC000897
• ETIM 5.0: EC000897
• UNSPSC: 30-21-18-11
• eClass 6.2: 27-14-11-20
• eClass 8.1: 27-14-11-20
• eClass 9.1: 27-14-11-20
• ETIM 4.0: EC000897
• ETIM 6.0: EC000897
• eClass 5.1: 27-14-11-20
• eClass 7.1: 27-14-11-20
• eClass 9.0: 27-14-11-20