WEIDMULLER 1770860000 Feed-through Tension Clamp Terminal

WEIDMULLER 1770860000 Feed-through Tension Clamp Terminal Specifications:

• Type: ZDU 4-2/3AN BL
• Order No.: 1770860000
• Version: Tension-clamp connection, for plug-in cross-connector, One end without connector
• GTIN(EAN): 4032248121205
• Qty.: 100 pc(s).
• Width: 6.1 mm
• Height: 61.5 mm
• Depth: 45.5 mm
• Depth including DIN rail: 46 mm
• Width(inches): 0.24 inch
• Height(inches): 2.421 inch
• Depth(inches): 1.791 inch
• Net weight: 10.26 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: blue
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Max. voltage(ATEX): 440 V
• Wire cross section max.(ATEX): 6 mm²
• Current(IECEX): 29 A
• Certificate No.(IECEX): IECEXULD16.0036U
• Ex 2014/34/EU label: II 2 G D
• Current(ATEX): 29 A
• Max. voltage(IECEX): 440 V
• Wire cross section max.(IECEX): 6 mm²
• Marking EN 60079-7: Ex eb II C Gb
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• End cover plate required: Yes
• Number of clamping points per level: 3
• Levels cross-connected internally: No
• Rail: TS 35
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1152892
• Current size C(CSA): 35 A
• Voltage size B(CSA): 600 V
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 26 AWG
• Current size B(CSA): 35 A
• Current size D(CSA): 5 A
• Voltage size C(CSA): 600 V
• Wire cross section max.(CSA): 10 AWG
• Rated cross-section: 4 mm²
• Rated current: 32 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 1.02 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 38 A
• Volume resistance according to IEC 60947-7-x: 1 mΩ
• Rated impulse withstand voltage: 8 kV
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.13 mm²
• Gauge to IEC 60947-1: A3
• Strippinglength: 10 mm
• Twin wire-end ferrules,min.: 0.5 mm²
• Wire connection cross section AWG,max.: AWG 10
• Wire connection cross section, finely stranded, max.: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 6 mm²
• Clampingrange,max.: 6 mm²
• Connection direction: Inclined/angled
• Number of connections: 3
• Twin wire-end ferrules,max.: 1.5 mm²
• Type of connection: Tension-clampconnection
• Wire connection cross section AWG,min.: AWG 26
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 4 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 4 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• TS 35 offset: 50.5 mm