WEIDMULLER 1791040000 Feed-through Terminal Block

WEIDMULLER 1791040000 Feed-through Terminal Block Specifications:

• Type: Feed-through terminal, Double-tier terminal, Tension-clamp connection
• Order No.: 1791040000
• Version: Tension-clamp connection, Vertically cross-connected, for plug-in cross-connector, One end without connector
• GTIN(EAN): 4032248331192
• Qty.: 50 pc(s).
• Width: 5.1 mm
• Height: 72.5 mm
• Depth: 54.5 mm
• Depth including DIN rail: 55.5 mm
• Width(inches): 0.201 inch
• Height(inches): 2.854 inch
• Depth(inches): 2.146 inch
• Net weight: 11.22 g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 130 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: blue
• Certificate No.(ATEX): DEMKO16ATEX1808U
• Max. voltage(ATEX): 550 V
• Wire cross section max.(ATEX): 4 mm²
• Current(IECEX): 21 A
• Certificate No.(IECEX): IECEXULD16.0036U
• Max. voltage(IECEX): 550 V
• Wire cross section max.(IECEX): 4 mm²
• Ex 2014/34/EU label: II 2 G D
• Marking EN 60079-7: Ex eb II C Gb
• Number of levels: 2
• Levels cross-connected internally: Yes
• Rail: TS 35
• End cover plate required: Yes
• Number of clamping points per level: 2
• PE connection: No
• Explosion-tested version: Yes
• Open sides: right
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1236167
• Current size D(CSA): 10 A
• Voltage size D(CSA): 300 V
• Wire cross section min. (CSA): 30 AWG
• Current size B(CSA): 25 A
• Voltage size B(CSA): 300 V
• Wire cross section max.(CSA): 12 AWG
• Rated cross-section: 2.5 mm²
• Rated current: 24 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 0.77 W
• Pollution severity: 3
• Rated voltage: 800 V
• Current at maximum wires: 24 A
• Volume resistance according to IEC 60947-7-x: 1.33 mΩ
• Rated impulse withstand voltage: 8 kV
• Certificate No. (cURus): E60693
• Conductor size Factory wiring min.(cURus): 30 AWG
• Conductor size Field wiringmin.(cURus): 30 AWG
• Voltage size C (cURus): 600 V
• Conductor size Factory wiring max.(cURus): 12 AWG
• Conductor size Field wiring max. (cURus): 12 AWG
• Current size C(cURus): 20 A
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-11
• Blade size: 0.6 x 3.5 mm
• Clampingrange,min.: 0.05 mm²
• Gauge to IEC 60947-1: A2
• Strippinglength: 10 mm
• Wire connection cross section AWG,max.: AWG 12
• Wire connection cross section, finely stranded, max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 4 mm²
• Clampingrange,max.: 4 mm²
• Connection direction: Inclined/angled
• Number of connections: 4
• Type of connection: Tension-clampconnection
• Wire connection cross section AWG,min.: AWG 30
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 2.5 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4,max.: 1.5 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²