WEIDMULLER 2025060000 VPU II Surge Protector

WEIDMULLER 2025060000 VPU II Surge Protector Specifications:

• Deliverystatus: This article will no longer be available in the future.
• Available until: 2020-05-01
• Type: VPU II 1 SP 347V R
• Order No.: 2025060000
• Version: Surge voltage arrester, Low voltage, with remote contact, TN-S->L-(PE)N, N-PE(U0≤ 230 V)
• GTIN(EAN): 4050118404685
• Qty.: 1pc(s).
• Alternative product: 2591220000
• Width: 18 mm
• Height: 106 mm
• Depth: 69 mm
• Mounting dimension - height: 75 mm
• Width(inches): 0.709 inch
• Height(inches): 4.173 inch
• Depth(inches): 2.717 inch
• Net weight: 154 g
• Humidity: 5 - 95% rel. humidity
• Operatingtemperature,min.: -40 °C
• Storage temperature,min.: -40 °C
• Storage temperature: -40 °C...85 °C
• Operatingtemperature,max.: 70 °C
• Storage temperature,max.: 85 °C
• Operatingtemperature: -40 °C...70 °C
• Certificate No. (cURus): E354261
• Rated Voltage UN: 347 V
• VPR(L/N-PE): 1,800 V
• SCCR: 200 kA
• Category: SPD TYPE 1CA/2CA
• Continuous voltage UC, max.: 510 V
• Test Voltage 39.1 (UL 1449): 600 V
• MCOV(L/N-PE): 510 Vac
• In: 20 kA
• Connection type: PUSH IN
• Cross-section for connected wire, solid,min.: 0.14 mm²
• Cross-section for connected wire, solid, max.: 1.5 mm²
• Strippinglength: 8 mm
• Cross-section for connected wire, solid core,min.(AWG): AWG 25
• Cross-section for connected wire, solid core, max. (AWG): AWG 15
• Colour: black,orange
• Optical function display: green = OK; red = arrester is defective - replace
• Rail: TS 35
• UL 94 flammability rating: V-0
• Design: Installation housing; 1TE, Insta IP 20
• Protection degree: IP20
• Segment: Power distribution
• Version (2): with remote contact
• Pollution severity: 2
• Surge voltage category: III
• Discharge current Imax(8/20µs) wire-PE: 40 kA
• Follow-on current extinguishing capability Ifi: Not available due for technical reasons
• Low voltage network: TN-S->L-(PE)N, N-PE(U0≤ 230 V)
• Protection level Upat IN(L/N-PE): ≤ 2.1 kV
• Requirements class, acc. to EN 61643-11: T2
• Short-circuit current rating ISCCR: 25 kA
• Voltage type: AC
• Discharge current In(8/20µs) wire-PE: 20 kA
• Fuse: 125 A gL > (if back up fuse > 125 A)
• Max. continuous voltage, Uc (AC): 510 V
• Requirements category acc. to IEC 61643-11: Type II
• Response time: ≤ 25 ns
• Signalling contact: 250 V 1A 1CO
• Tighteningtorque,min.: 2 Nm
• Wire connection cross section AWG,min.: AWG 14
• Wire cross-section,solid,min.: 4 mm²
• Wire connection cross-section, finely stranded,min.: 2.5 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),min.: 2.5 mm²
• Connection cross-section, stranded, min.: 4 mm²
• Strippinglength,rated connection: 15 mm
• Tighteningtorque,max.: 3 Nm
• Wire connection cross section AWG,max.: AWG 0
• Wire cross-section,solid,max.: 16 mm²
• Wire connection cross section, finely stranded,max.: 25 mm²
• Conductor cross-section, flexible, AEH (DIN 46228-1),max.: 25 mm²
• Connection cross-section, stranded, max.: 50 mm²